Great Dane excavating co.

[Exclusive RC]

gettin better and better each day

[Radar]

That scissor neck is coming out sweet. I like it! Good job

[Cooper]

Getting towards the end . Or the front I guess. Been trying to keep things square. And just a quick pic of the future employee, he is like the poster child for Applebee's--- eatin' good in the neighborhood!!!! He just looks bulky in that pic . Figure bulk him up before introducing him to the outdoor population of seasonal employees.

[Cooper]

It's a panoramic pic, and I'm not steady!!!

[Mikem]

Both the trailer and napoleon are lookin good . What is the height of your I beams in the trailer deck ? Mike

[Cooper]

Thanks for the complements guys, like I've said my welding skills are quite a bit rough but almost all will be hidden .

Mikem, the I beams are almost one inch tall. I did not look into actual dimensions of trailers, just went with what I thought. The panoramic pic has distorted it quite a bit. Tomorrow I will try and get a better one. I know I'm about to run into a problem with the actuators, the top (black plastic housing) is just a bit taller than what the decking will be. One of those things of my redneck engineering, measure after you build it,,, then engineer some more.

[Radar]

That's awsome that's all I have to say!!

[Lil Giants]

Put a live roll on the back of trk frame & a winch behind trk cab, then the scissor neck will function like a real one.

[Cooper]

Originally Posted by Lil Giants

Put a live roll on the back of trk frame & a winch behind trk cab, then the scissor neck will function like a real one.

http://youtu.be/PS5cvTpWmn8

This is what I'm aiming for joe . I will figure it out somehow whit the actuators I have . In that video you can see the landing legs and also how the fifth wheel pin is able to slide up when the deck hits the ground. That is also going to be a little bit of challenge. Easy to do but withstand some weight being pulled will be the creative engineering. But if all else fails, yes, she will be a roll-up scissor neck. Many different names, hydraulic folding gooseneck, sissorneck.

[Cooper]

http://youtu.be/WRoj1bkmcxc
And another video I found. Now how cool will that be? Stay sitting in my lounge chair and not have to unhook anything!!! That's why I was going to make this have its own radio system. Just have to install a fifth wheel unlock servo in the truck and I'll only need to get up to pee or refill beverage. !!!

[Lil Giants]

Those lil winches RC4WD sells would handle the job.

https://www.youtube.com/watch?v=oi05hjyHpT8

[Cooper]

http://youtu.be/6FWF0a1Rt7w

Finally got it figured out somewhat!!! Still need to limit the lifting legs so the neck will elevate completely. But it is self contained rc!!

[Lil Giants]

Putting a floor on the main deck, would that work for leg stops?

Looking good.

Turn your Iphone a 1/4 turn when filming.

[Cooper]

Originally Posted by Lil Giants

Putting a floor on the main deck, would that work for leg stops?

Looking good.

Turn your Iphone a 1/4 turn when filming.

Next video I'll remember to do that. You have to reprogram me every so often

Yes putting 1/8" thick bass wood on for decking. But I am going to place a metal stop in frame rails to facilitate the landing legs to stop and allow neck to raise higher. I still don't know if two actuators will be enough power to lift when 60# plus load on. If not I can add one in middle or two. Haides or high water I'm bound to make this work!!!! Also have to figure out the movable kingpin. That might just be gravity to facilitate that or simple spring band. Figured you guys have remote quick change buckets for the excavators, so when I'm not around the easily motivated kids to unhook something I can still enjoy my lounge chair

[TRUCKMAKER]

Originally Posted by Cooper

Next video I'll remember to do that. You have to reprogram me every so often

Yes putting 1/8" thick bass wood on for decking. But I am going to place a metal stop in frame rails to facilitate the landing legs to stop and allow neck to raise higher. I still don't know if two actuators will be enough power to lift when 60# plus load on. If not I can add one in middle or two. Haides or high water I'm bound to make this work!!!! Also have to figure out the movable kingpin. That might just be gravity to facilitate that or simple spring band. Figured you guys have remote quick change buckets for the excavators, so when I'm not around the easily motivated kids to unhook something I can still enjoy my lounge chair

You've done a fantastic job on this so far! We had a military tri-axle foldable goose neck at work for a couple years that required a winch to hook up to. Since we were using it for testing and didn't take it on the highway, we cheated and welded a couple legs to each side so we could use any available tractor to move it. It was a pain because the legs weren't timed, you had to crank each side separately.
The king pin was in a tube and was gravity activated. It was a 4" pin (read heavy) vs. a standard 2" pin. I would think you could do the same, maybe add a lite spring to make sure it drops when it needs to.

[Mikem]

Cooper why don't you use alder as opposed to basswood it is harder nice grain and would take a 60 # load better load . If you want some email me off list with a list . Mike

[Cooper]

Originally Posted by Mikem

Cooper why don't you use alder as opposed to basswood it is harder nice grain and would take a 60 # load better load . If you want some email me off list with a list . Mike

I really haven't thought about much other wood. Reason for that was that I have quite a few sheets of 4" x 24" . For me I think it would look cool if it does get torn up from use. I like the dented and scratched look. It really hides a lot of other imperfections . I was thinking of milling very small slots in it to appear to be planking. Just rub some stain on and it will penetrate to the grooves, then rub off leaving the appearance of multiple strips.

[Cooper]

Originally Posted by TRUCKMAKER

You've done a fantastic job on this so far! We had a military tri-axle foldable goose neck at work for a couple years that required a winch to hook up to. Since we were using it for testing and didn't take it on the highway, we cheated and welded a couple legs to each side so we could use any available tractor to move it. It was a pain because the legs weren't timed, you had to crank each side separately.
The king pin was in a tube and was gravity activated. It was a 4" pin (read heavy) vs. a standard 2" pin. I would think you could do the same, maybe add a lite spring to make sure it drops when it needs to.

Thank you!! I didn't even know about the kingpin until a little while ago. The spring I was thinking of is some simple strip of spring steel attached to deck (metal part) and resting on top of pin. This whole project was to show the wife how lazy I can be not having to move from any location yet still play with multiple toys I'm almost there . Although trying to be lazy has been a lot of work!!! Originally my thoughts were for the winch but having to mod the truck,,, well at the time i thought a trailer would be easier, I know my logic doesn't always work out. Lol!!

[TRUCKMAKER]

As far as you are I wouldn't go the winch way, you pretty much got the "lazy" down pat just deck it and tune it to the weight and your good!

[Cooper]

I'll keep you in mind mikem, thank you.

Truckmaker, I got to messing with it tonight. Put some temporary stops on the outriggers/landing legs. Lifts the vice I had on it along with four 123 mill blocks. But,,, I don't think the actuators will be able to completely lift the heavy excavator. I think another one in center is needed, maybe two. I'm very close on clearances to put two on each side, side by side. I don't think I could use e-clips on the shafts, would have to change to a set screw to give me a bit more wiggle room. Center has more than enough for one or two side by side, but then more drilling and welding in a rather hard to get to area. It's always gonna be I thought I had enough on the shelf at home but,,, but I need to get more parts !!! But good news is I have the clearances just right for the truck hooking up with fifth wheel. And definitely have to cut some spring steel to add to leaf springs on truck. Squats stock right away. It's one of these circumstances, have truck,,,,, build trailer,,, need to modify truck to suit built trailer. It may just get completely out of hand if a king hauler is needed, extra drive axle, different tranny/motor,,,,,,,,,,, help me I've got to stop!!!!!! Lol!!!! Really need warm weather to get here fast, it will get me outside!!