|
Truck Building Tech Covers mechanical and electrical components for truck modeling |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Re: Help modify a king hauler with MFU
Great thanks, I already have the tamiya mfu, so if the speaker box is removed is there much difference in sound ? Cheers James
|
#2
|
|||
|
|||
Re: Help modify a king hauler with MFU
Also how did you shorten the sleeper ?
|
#3
|
|||
|
|||
Re: Help modify a king hauler with MFU
Quote:
As for shortening the sleeper, that's really a basic...I can just suggest to use adhesive tape to mark accurately the part to be removed, then use a fine saw (or a hobby knife....gives cleaner cuts, so less file work, but much more dangerous for the fingers). Better position the tape on the side you will keep. When you get your two parts, glue them together using some thin plastic stripes inside to align and reinforce the joint, and eventually body putty to fill the remaining gap. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|