|
Euro Style Trucks and Trailers A place for the Euro style trucks single and twin axle trucks and trailers... |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Re: Volvo FH12 Flatbed
i dnt want to be mean,but u have the wrong frame for the built that u want...u need to strech the frame minimum 10'' then u will need a second stering axel with a servo on it,to go up and down just like the real one,and eventualy either a crane or a trailer,then u will have a bad *** truck...just a idea.
|
#2
|
||||
|
||||
Re: Volvo FH12 Flatbed
Quote:
I'm not sure at this point whether I want anything special on the truck. I have two 3-axle tractor-trailers in my fleet, and was hoping to mix it up with this one. I think I will be sticking with a 2-axle standard flatbed, at least, for now. I should say that the picture of the 1:1 is only there because it has the low-side "brick-load" style bed, and Volvo cab. The trailer, 3rd axle, and crane were not meant to be on my truck. The roof is being stripped, and should be ready in a few days (ran out of thinner). The bumper is ready for primer, but the cab needs minor trimming before it is ready. Then some paint! Does anyone have any idea of how to mask off the trim pieces? (handles and wipers) Thanks for your comments guys!
__________________
-Chris To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|