RC Truck and Construction  

Go Back   RC Truck and Construction > RC Truck's Defenders of the land. > Military Vehicles.

Military Vehicles. Trucks/Support Vehicles in here.


Reply
 
Thread Tools Display Modes
  #21  
Old 01-10-2018, 03:37 AM
doodlebug's Avatar
doodlebug doodlebug is offline
Big Dawg On The Bone
 
Join Date: Dec 2010
Location: South 40 Swamp, Utah
Posts: 2,398
doodlebug is on a distinguished road
Default Re: ZIS 150 Complete Kit

Quote:
Originally Posted by Mikem View Post
I with you on that 2mm nut driver lol . I’ve stopped on mine till I get the right servo Mount and get back from cabin fever . I’m going to try to find a battery that fits under the seat
Look up Wiha tools! They have those metric nut driver sets!
https://www.wihatools.com/picofinish...n-canvas-pouch
Cheers, Neil.
Reply With Quote
  #22  
Old 01-10-2018, 08:21 AM
kaptain Jack's Avatar
kaptain Jack kaptain Jack is offline
Journeyman
 
Join Date: Jan 2012
Location: Toronto Canada
Posts: 613
kaptain Jack is on a distinguished road
Default Re: ZIS 150 Complete Kit

Rc stores that sell helicopters, usually carry those metric drives, since they are used in helis.
Reply With Quote
  #23  
Old 01-10-2018, 08:59 AM
rc13's Avatar
rc13 rc13 is offline
Green Horn
 
Join Date: Jan 2011
Location: Midwest USA
Posts: 210
rc13 is on a distinguished road
Default Re: ZIS 150 Complete Kit

Quote:
Originally Posted by Mustang46555 View Post
It seems very close to a true 1/12th scale, the size difference is noticeable when you put it right beside a King Hauler. I don't have a spare Bruder figure to try but a 5" walking dead action figure is a perfect fit so I believe the Bruder would be a bit small.
Thanks for the info.
Look forward to seeing it running..
Reply With Quote
  #24  
Old 01-10-2018, 04:39 PM
Mustang46555 Mustang46555 is offline
Wannabe
 
Join Date: Sep 2013
Location: North Webster, IN
Posts: 305
Mustang46555 is on a distinguished road
Default Re: ZIS 150 Complete Kit







Got some color on the cab, now to start some light weathering.
Reply With Quote
  #25  
Old 01-10-2018, 04:43 PM
Mustang46555 Mustang46555 is offline
Wannabe
 
Join Date: Sep 2013
Location: North Webster, IN
Posts: 305
Mustang46555 is on a distinguished road
Default Re: ZIS 150 Complete Kit

Kind of going for this look;



Not going crazy with weathering, just light fluid spills and mismatch paint touch ups
Reply With Quote
  #26  
Old 01-10-2018, 07:05 PM
rc13's Avatar
rc13 rc13 is offline
Green Horn
 
Join Date: Jan 2011
Location: Midwest USA
Posts: 210
rc13 is on a distinguished road
Default Re: ZIS 150 Complete Kit

I like it... Ah, just run it in the dirt and mud a few times, don't clean it, and you will be good to go. Thats what I do.
But some light weathering will be nice...
I bought the 1/16 Opil Blitz 4x4 version a while back. It is very cool, but it is kindof small.
Even though this is a 1/12 scale, I would lean towards this King Kong, especially if it can be converted to 4x4.
Reply With Quote
  #27  
Old 01-12-2018, 01:45 PM
Repkyle Repkyle is offline
Newbie
 
Join Date: Jan 2018
Posts: 1
Repkyle is on a distinguished road
Default Re: ZIS 150 Complete Kit

Great Job. I have been hoping to see what others do with this kit. I received mine the day after Christmas. I think it is really well thought out. I personally would change a couple design aspects.
Reply With Quote
  #28  
Old 01-17-2018, 09:44 AM
razvan nicola razvan nicola is offline
Newbie
 
Join Date: Sep 2017
Posts: 2
razvan nicola is on a distinguished road
Default Re: ZIS 150 Complete Kit

Hi, and sorry for disturbing. Can you give us some links for the respective transmission and transfer case? Also available for the rest of the components necessary to modify it to 4x4.
Thank you,
Răzvan
Reply With Quote
  #29  
Old 01-17-2018, 03:10 PM
Mustang46555 Mustang46555 is offline
Wannabe
 
Join Date: Sep 2013
Location: North Webster, IN
Posts: 305
Mustang46555 is on a distinguished road
Default Re: ZIS 150 Complete Kit

Sorry Razvan, I was just referring to parts I had seen listed and from building know the conversion is possible. I have no plans to convert this truck so I don't have any links saved for those parts.
Reply With Quote
  #30  
Old 02-15-2018, 08:35 AM
ReneDK ReneDK is offline
Green Horn
 
Join Date: Feb 2018
Location: Denmark
Posts: 177
ReneDK is on a distinguished road
Default Re: ZIS 150 Complete Kit

Hi from a new user from Denmark.
It looks good your truck, I have to order one soon, so I just have a few questions.
What did you use to color the wooden board ?? Where do you have esc and receive to be in it ?? Can it all be there ?? I also think the battery must be in a box if it can not be under the seat ??
Do not hope it was too much at one time. Thanks in advance
Reply With Quote
  #31  
Old 02-15-2018, 07:02 PM
Mustang46555 Mustang46555 is offline
Wannabe
 
Join Date: Sep 2013
Location: North Webster, IN
Posts: 305
Mustang46555 is on a distinguished road
Default Re: ZIS 150 Complete Kit

Welcome to the forum! Thanks for the compliments.

The wood was stained with a "black wash" solution I make it from common rubbing alcohol with a small amount of black india ink added. Go light on the ink, it only takes a few drops to an old airbrush size bottle of alcohol. Apply with a wide brush, it may take several coats depending on your mix. Better to apply twice the ink does not come off!

The receiver is in the gas tank. The kit's gas tank snaps apart just so electronics can be put there. It will hold most receivers I use an 8ch Airtronics.

The ESC, an older Futaba unit (small) is under the driver seat. There are tabs at each end of the seat base that allow the seat to snap into place. I trimmed my tabs down quite a bit so the seat would come out better if I needed to get at the ESC. Also the on-off switch is mounted on the passenger side front of the seat base. Easy to get at through the passenger door and very hard to see otherwise.

Since I run NiMh batteries there isn't enough room under the seat and access would be a bit tough. I built a wooden crate that's in the bed to hide the battery. It's just visible in some of the pictures.

If you'd like a better picture please let me know and I'll post some.

Good luck with your build, it's a nice kit and a blast to drive!
Reply With Quote
  #32  
Old 02-15-2018, 09:20 PM
Mikem Mikem is offline
Journeyman
 
Join Date: Mar 2013
Location: Ontario
Posts: 705
Mikem is on a distinguished road
Default Re: ZIS 150 Complete Kit

I second that but I put my battery under the box over the rear axle and both the ESC and reciever in the gas tank
Reply With Quote
  #33  
Old 02-16-2018, 08:58 AM
Mustang46555 Mustang46555 is offline
Wannabe
 
Join Date: Sep 2013
Location: North Webster, IN
Posts: 305
Mustang46555 is on a distinguished road
Default Re: ZIS 150 Complete Kit

I do like the idea of all the electronics in the tank. I tried getting both in the fuel tank but my receiver was too big. Hated to buy a new one when I had that one on hand so the esc went under the seat. Putting the battery over the axle is a great idea. Probably helps traction some if used off road.

Rene, you might check the RC Truck and Construction facebook page for ideas too. Some folks there modified the kit to a more civilized version and they look REALLY good!
Reply With Quote
  #34  
Old 02-16-2018, 12:13 PM
ReneDK ReneDK is offline
Green Horn
 
Join Date: Feb 2018
Location: Denmark
Posts: 177
ReneDK is on a distinguished road
Default Re: ZIS 150 Complete Kit

Quote:
Originally Posted by Mikem View Post
I second that but I put my battery under the box over the rear axle and both the ESC and reciever in the gas tank
Do you have any pictures of how you put your battery?
And what battery do you use?
I'm thinking about buying a few small lipos.
Reply With Quote
  #35  
Old 02-16-2018, 12:18 PM
ReneDK ReneDK is offline
Green Horn
 
Join Date: Feb 2018
Location: Denmark
Posts: 177
ReneDK is on a distinguished road
Default Re: ZIS 150 Complete Kit

I have not quite decided whether there should be another green army truck when I get one, have also seen pictures of a red and black civil edition I thought was really nice.
Reply With Quote
  #36  
Old 02-16-2018, 01:18 PM
Mikem Mikem is offline
Journeyman
 
Join Date: Mar 2013
Location: Ontario
Posts: 705
Mikem is on a distinguished road
Default Re: ZIS 150 Complete Kit

Hi Rene to install my battery I cut out the wood rib above the axle and just laid the battery on the frame and the box holds it down . I painted my truck gray with black fenders and lowered it by 5/16 of an inch . I think it looks more civil now . Some day I’ll post pics on this site but not now . I do have pics on the rc truck on face book . Mike
Reply With Quote
  #37  
Old 02-17-2018, 02:30 AM
ReneDK ReneDK is offline
Green Horn
 
Join Date: Feb 2018
Location: Denmark
Posts: 177
ReneDK is on a distinguished road
Default Re: ZIS 150 Complete Kit

Okey super ... I'm looking at it. Do you use lipo battery?
Reply With Quote
  #38  
Old 02-17-2018, 06:58 AM
Mikem Mikem is offline
Journeyman
 
Join Date: Mar 2013
Location: Ontario
Posts: 705
Mikem is on a distinguished road
Default Re: ZIS 150 Complete Kit

No just a nimh battery 7.2 volt
Reply With Quote
  #39  
Old 02-17-2018, 06:59 AM
Mikem Mikem is offline
Journeyman
 
Join Date: Mar 2013
Location: Ontario
Posts: 705
Mikem is on a distinguished road
Default Re: ZIS 150 Complete Kit

But what I might do is take a battery apart put 4 cells under the seat and one on each side of the motor
Reply With Quote
  #40  
Old 02-17-2018, 08:52 AM
ReneDK ReneDK is offline
Green Horn
 
Join Date: Feb 2018
Location: Denmark
Posts: 177
ReneDK is on a distinguished road
Default Re: ZIS 150 Complete Kit

If you can have a nimh battery there, then there should also be Room for a small lipo.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:08 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.