Re: Lesu Liebherr 574 loader kit build
 

Another shot of the valve assembly: https://s31.postimg.org/p13q04jrb/20180402_181743.jpg


the hydraulic lines need to be trimmed and connected, I also need to run the lines between the valve assembly and the hydraulic pump.

If anybody has any tips for bleeding the air out of the system please speak up.

anybody know where i can find some kind of one-way tank vent. I don't want my hydraulic fluid spilling out if Im @ a weird angle.

Re: Lesu Liebherr 574 loader kit build
 

Bucket tilt mechanism: https://s31.postimg.org/bk6rhgjs7/20180402_181812.jpg

Re: Lesu Liebherr 574 loader kit build
 

Regarding the tank-vent one usually just go for a bit longer hose, with the end placed at a higher point under the hood

Re: Lesu Liebherr 574 loader kit build
 

As temperature in the system goes up and down you will want the tank to vent both directions so I don't think you would want a check valve in there. I know some full size vents will be ran into a seperate vented/filtered overflow tank

Re: Lesu Liebherr 574 loader kit build
 

Great job on the build and thanks for the pics.
Fumotec sells this vent filter: Vent

As for bleeding the system, I just fill it with oil and cycle the cylinders with the pump running at slow speed, keep topping up the oil as needed and cycle cylinders until all the air is out.

Re: Lesu Liebherr 574 loader kit build
 

so, i guess postimage is dead?? anybody have a suggestion for a replacement??

Re: Lesu Liebherr 574 loader kit build
 

here is a link to the latest video: https://youtu.be/YqmuZATpBn4

Re: Lesu Liebherr 574 loader kit build
 

Post image changed the rules a while ago.

https://postimg.org/image/.... needs to become
https://postimg.cc/image/....

Let's try this.