Re: 1/10 Caterpillar D8T Build (3D Printed)
 

[IMG]https://i.ibb.co/b3xFwpL/20231123-010553.jpg[/IMG] [IMG]https://i.ibb.co/VLQBf5X/20231123-010606.jpg[/IMG]

Re: 1/10 Caterpillar D8T Build (3D Printed)
 

Here's a video of my reversing alarm.

https://youtu.be/VIv8aKlfrZo?si=RYaSmOFCmNyuWr0l

Re: 1/10 Caterpillar D8T Build (3D Printed)
 

Finally 99% done.... except the plexiglass windows and windshield....

https://i.ibb.co/ngSfjQR/20231123-012556.jpg https://i.ibb.co/BL2F74h/20231123-012614.jpg

https://i.ibb.co/PmKL96H/20231123-012634.jpg https://i.ibb.co/CbxDx5j/20231123-012705.jpg

https://i.ibb.co/DD4shyg/20231123-012717.jpg https://i.ibb.co/6NWn2zW/20231123-012740.jpg

https://i.ibb.co/wCBGjX6/20231123-012757.jpg https://i.ibb.co/zfpsY2g/20231123-012811.jpg

Re: 1/10 Caterpillar D8T Build (3D Printed)
 

test run...

https://youtu.be/J-29v8VGFls?si=SbNQCiFsIlaa2O8k

Re: 1/10 Caterpillar D8T Build (3D Printed)
 

What a beast.... are you going to paint it....
I wondered how you would do the back-up alarm, since you can't just come off one of the motors otherwise you would get a back-up alarm when you made a turn in one direction or the other... the servo switch is a slick idea...

Re: 1/10 Caterpillar D8T Build (3D Printed)
 

Yep, i know that would happen since it is programmed to the TX to use both channels 1 and 2 for steering and throttle, I guess I just have to live with it, that would be the extent of my analytical skills to be able to come up with a solution to that problem. But I am going to definitely have it on my Oshkosh Truck too, for sure that system will work just fine considering that ch 2 is exclusive for throttle only. thanks
By the way, yep, it will get painted.