Flat bottom half round trailer
 

I guess it's more of a 1/4 round but... Here's a start on this one...

http://i1293.photobucket.com/albums/...psy4swj3xh.jpg
http://i1293.photobucket.com/albums/...psnvhw91dl.jpg
http://i1293.photobucket.com/albums/...ps34ld8iik.jpg

Re: Flat bottom half round trailer
 

:eek: She's going to be a beauty!

Re: Flat bottom half round trailer
 

i have a set of ihb steer super singles waiting for
her

Re: Flat bottom half round trailer
 

On the real deal, does the center support brace sit directly above the lift axle or is it slightly off one way or the other? I don't have a good square side on picture of your real trailer to go from.

Re: Flat bottom half round trailer
 

just a touch forward of center line of lift axle

Re: Flat bottom half round trailer
 

OK that's perfect Mark. I was hoping that was the case as it makes everything I've done so far line up better.

Re: Flat bottom half round trailer
 

Good start

Re: Flat bottom half round trailer
 

People say that sometimes you need to go backwards in order to go forwards and that's what happened here. I ordered in a special sheet of softer aluminum to use on this and a couple of other builds because the length and sharpness of the bends are hard on my small sheet metal equipment. I was able to get the right grade of aluminum but not the desired thickness despite my efforts. Getting it was a gong show as the first sheet I ordered showed up heavily damaged and unusable other than for building cabs. The supplier ordered another sheet right away and a few days later it showed up but was also damaged slightly but usable(someone tried to use a forklift to lift a sheet off of the top and bent one side). Anyway, with the material being thinner than I wanted and soft I was not sure how it would work out. I bent up the tub for this and it was very easy to work with. Once bent I realized how easily it dents where it's flat and that it is no good for this trailer. After Xmas I bent up a new tub using regular material and I've spent a number of hours over the last few days working to get things back on track. It was tough to get it bent the same as the parts I had already made but after some swearing, sweating and struggling I got all the pieces fit and it's coming along.

http://i1293.photobucket.com/albums/...pssezrvcfb.jpg
http://i1293.photobucket.com/albums/...pstzslrbz2.jpg
http://i1293.photobucket.com/albums/...ps7ntccfav.jpg
http://i1293.photobucket.com/albums/...pskocz7qfp.jpg
http://i1293.photobucket.com/albums/...psmmduakwl.jpg
http://i1293.photobucket.com/albums/...psh1mbhvsu.jpg
http://i1293.photobucket.com/albums/...pszzinrbdu.jpg

Next up will be the tailgate...

Re: Flat bottom half round trailer
 

five months later i guess i need to start saving $$$ again!!!!!

Re: Flat bottom half round trailer
 

Better late than never I guess Mark.lol... You never said what October...:rolleyes:

Re: Flat bottom half round trailer
 

that is true. shes looking great well worth the time spent

Re: Flat bottom half round trailer
 

:eek: nice work!

Re: Flat bottom half round trailer
 

I'm happy you like it Mark! It's my main focus right now so it should come together at a decent pace. Sorry for the delay but I really felt it wasn't good enough the way it was. Because of it's shape and size this thing will hold a ton of dirt:eek:. Best be careful not to overload it!

Thanks Brandon.

Re: Flat bottom half round trailer
 

i was told your box could handle any load i toss at it

Re: Flat bottom half round trailer
 

Keep it clean Mark....:p Yeah, maybe but for how many times?lol I can see 50# loads in this thing easy do to it's volume. It may very well dump that much but I'm not trying it!:cop: It looked like Ben and Alex had some pretty crazy loads on their trailers and they were dumping fine. Yours will hold almost a 3rd more though so it's hard to say. We are all guilty of overloading our stuff. If we kept within the scale DOT range nothing would ever break.lol

Re: Flat bottom half round trailer
 

im pulling 124,869 i boulders 41.35 ton today

Re: Flat bottom half round trailer
 

Nice! How about some pictures?

Re: Flat bottom half round trailer
 

Not pretty crazy loads, but more like "PRETTY CRAZY OPERATORS" (Ben and Alex). But I guess I'll be joining them soon.:D

-Terry

Re: Flat bottom half round trailer
 

You do such good work its crazy. I cant wait to see the finished product.

Re: Flat bottom half round trailer
 

Thanks for the compliment. I'm not sure if my work is crazy good but It's definitely good to be crazy.

Another day in the life of a toy builder. I have never spent an entire day on a tailgate until today.lol Shooting for a realistic looking high lift style tailgate without the mechanics to make it lift. I'm not sure how it will function in real life but it looks OK I think.lol

https://youtu.be/emzOU5Cicv4

http://i1293.photobucket.com/albums/...psouoic8ys.jpg
http://i1293.photobucket.com/albums/...psqzun34lc.jpg
http://i1293.photobucket.com/albums/...psvvchursq.jpg
http://i1293.photobucket.com/albums/...ps4a9bqihd.jpg
http://i1293.photobucket.com/albums/...ps1ke0dlj2.jpg
http://i1293.photobucket.com/albums/...psi81plh7v.jpg
http://i1293.photobucket.com/albums/...pskxs7fo6s.jpg

Re: Flat bottom half round trailer
 

here you go reg. i cant upload from my phone anymore
41.25 ton in the 1:1 half round flat bottom tub
http://i1335.photobucket.com/albums/...ps1qnlkyos.jpg

Re: Flat bottom half round trailer
 

Oh, oh! That doesn't look good!

Re: Flat bottom half round trailer
 

It's all fun and games with RC trucks and wreckers but your right, that can't be good or cheap!:eek::cop:

Re: Flat bottom half round trailer
 

dammmmmm reg i just seen the video WOW!!!
i must have missed it while posting the wrecker pic
WOW!!!!! you the man!!!

Re: Flat bottom half round trailer
 

OK good! I was thinking to myself "I hope he doesn't hate it cause he didn't say anything".lol I drilled the tail light holes, slots for tailgate latches and I'm about to see how to attach the spill plate. After that I will be moving on to the ladders.

What happened to the 1:1?

Re: Flat bottom half round trailer
 

filters froze up. fuel guy left the hatch open on the fuel tank
a few weeks back and water got in. and with running low on fuel
i must have sucked up enough water to freeze up.

Re: Flat bottom half round trailer
 

Fuel guy bad!:cop:

A small update. Tail light holes drilled, spill plate lightly glued in place(might need to come up a bit?), and the front flap mounts made.

http://i1293.photobucket.com/albums/...ps8ug2onbw.jpg
http://i1293.photobucket.com/albums/...psnu4yyq0d.jpg
http://i1293.photobucket.com/albums/...psdfjbuvjw.jpg
http://i1293.photobucket.com/albums/...psthza0tnh.jpg

Re: Flat bottom half round trailer
 

reg is the steerable axle as wide as the regular axle? back pan looks real nice

Re: Flat bottom half round trailer
 

Yes it appears to be very close to the same width especially with the super single tires. It always wants to flop over to the right for some reason and I sometimes forget to straighten it out for pictures. I'm not sure how to go about making it turn the correct direction while being towed. It probably needs some soft springs pulling on it from side to side to keep it straight. It looks like there might be room to install a lift servo if you were so inclined to do so...

Re: Flat bottom half round trailer
 

Reg , look at steering stabilizer shocks with coil over spring. Will try and take a picture of my training wheels tomorrow .
Cheers!

Re: Flat bottom half round trailer
 

Hello Reg If you put a light spring across the tie rod it will self steer. Ed

Re: Flat bottom half round trailer
 

Gonna be one bada$$ bucket bigford!!!:cool:

Awesome craftsmanship and attention to detail as usual Reg! Keep up the good work hoss!:D

Can't wait until it warms up here so I can get mine out and play in the dirt again!!!:bounce:

-Alex

Re: Flat bottom half round trailer
 

i'm thinking this is going to be my favorite new toy

Re: Flat bottom half round trailer
 

I like that High lift tailgate.

Re: Flat bottom half round trailer
 

This is coming out really nice Reg.

Re: Flat bottom half round trailer
 

Thanks guys! I'm glad you are liking it Mark. Hopefully it serves you well.

Here's a little update. It doesn't look like much is happening but this trailer is eating up more time than I thought it would. I like how it's turning out though so I'm not grumpy yet.lol

I added some springs to the steer axle. They aren't super pretty but they are mostly out of sight and they keep things straight. I finally finished up the flaps and mounts as well as the gate latches. Next up will be the ladders and then the tarp...

http://i1293.photobucket.com/albums/...psntmlrs6g.jpg
http://i1293.photobucket.com/albums/...psclpw52tm.jpg
http://i1293.photobucket.com/albums/...psytfpyr6r.jpg
http://i1293.photobucket.com/albums/...psznokmbvq.jpg
http://i1293.photobucket.com/albums/...ps4oodhsq0.jpg

Re: Flat bottom half round trailer
 

Going GOOD Reg I am Looking..............................:cool:

Re: Flat bottom half round trailer
 

ya baby!! thats what im talking about this trailer is going to be great!!!!

Re: Flat bottom half round trailer
 

Sick looking rear

Re: Flat bottom half round trailer
 

Ladders~check

Slowly but surely the list is shrinking.


http://i1293.photobucket.com/albums/...pso4kun56i.jpg
http://i1293.photobucket.com/albums/...psclb1jmnz.jpg
http://i1293.photobucket.com/albums/...psbbyne7pz.jpg
http://i1293.photobucket.com/albums/...ps1qp89xdo.jpg
http://i1293.photobucket.com/albums/...psmi6wuamh.jpg