|
I got a new idea....
My next project should have been a Torro M16 halftrack, but due to an ugly big car bill it unfortunately has to wait a bit....
But then got another idea instead.... https://i.ibb.co/t4MQy2z/IMG-20230817-143922.jpg Had this wild led which takes a 9v battery directly and since I was in Normandy I've been a bit crazy about the big anti-aircraft searchlight so why not play around with that idea. This model I'm thinking of. https://i.ibb.co/vcJYT6v/Screenshot-...4025169980.jpg After a trip to various boxes and around the boys' room, I had a few things to go on with. Here is what I achieved today... Now it needs some paint and the electrics installed, so time will tell if it can look roughly right. https://i.ibb.co/ZNpnr43/IMG-20230817-110004.jpg https://i.ibb.co/j4Wd4nJ/IMG-20230817-133159.jpg https://i.ibb.co/1sFBNLz/IMG-20230817-133208.jpg It won't be 100%, I know. |
Re: I got a new idea....
That's a really bright idea!
Do you have metal Coffee Cans available to try looking at for the light housing? |
Re: I got a new idea....
No, unfortunately not, I plan to try this one in plastic, but I don't know if it can withstand the heat
|
Re: I got a new idea....
Metal coffee cans might be hard to come by, what about any large metal vegetable can...
Really bright idea.... I see what you did there...LOL |
Re: I got a new idea....
Awesome! Something new and different, I love it. That LED chip will generate some heat but if you mount it on a larger aluminum heat sink it might be ok in the plastic container. Put some short standoffs between the container and the heat sink so air can circulate around it.
|
Re: I got a new idea....
Quote:
|
Re: I got a new idea....
The back of the joint is no problem, it hardly gets hot. If plastic can't hold, I go in search of a metal can.
Lower parts will also be slightly different as it does not get the wheel completely free in corners, but will sit inside underneath. |
Re: I got a new idea....
Sorry, it was a pretty bad joke...
I'm glad it should be a cool enough led to work in that setup. I'm thinking this would look killer next to something like a M45 Quad-mount 50cal |
Re: I got a new idea....
You going to have the LED so that it shines back into the reflector like on the original? Or just mount the LED on the back surface of the light so it shines out?
|
Re: I got a new idea....
Quote:
This one will be my next vehicle |
Re: I got a new idea....
Quote:
|
Re: I got a new idea....
Quote:
|
Re: I got a new idea....
So It got primer for the first time
https://i.ibb.co/BZPCpY0/IMG-20230824-093554.jpg Also started fitting lights and it all works, still need the finished paint and some weathering. https://i.ibb.co/56cHZt0/IMG-20230824-114402.jpg https://i.ibb.co/RzycFZs/IMG-20230824-114435.jpg As I said, I know it's not 100% "right", but I hope it will be okay https://i.ibb.co/tCPQ03Y/IMG-20230824-114545.jpg https://i.ibb.co/KcnbRdT/IMG-20230824-114553.jpg |
Re: I got a new idea....
Wow.. it looks great....it will go well with the rest of your WW2 stuff....
|
Re: I got a new idea....
Thank you, and yes, I hope it will fit in
|
Re: I got a new idea....
Then it was finished
https://i.ibb.co/DQfhKkz/IMG-20230825-183836.jpg https://i.ibb.co/gWpJVh8/IMG-20230825-183842.jpg https://i.ibb.co/CsJfG7h/IMG-20230825-183851.jpg https://i.ibb.co/5GsMQbm/IMG-20230825-183909.jpg https://i.ibb.co/f0211Wd/IMG-20230825-183923.jpg https://i.ibb.co/LxhDRQC/IMG-20230825-183930.jpg A Sherman just came by https://i.ibb.co/jHzSxDD/IMG-20230825-184507.jpg https://i.ibb.co/CtP9BfN/IMG-20230825-184519.jpg Pictures of on and off https://i.ibb.co/FsDLX4N/IMG-20230825-185611.jpg https://i.ibb.co/k5SCcDK/IMG-20230825-185600.jpg And then just a link to a small video on YT https://youtu.be/KHpkwXwdwU0?si=xOSo-fu5cKWrXxJJ https://youtube.com/shorts/5t6GsbOrr...mwfLDJkCAN7tMU |
Re: I got a new idea....
Not bad for something made from stuff laying around. Now all you need is a scale HE111 pinned in the searchlight beam. (Or maybe make your own Bat signal?)
|
Re: I got a new idea....
Thanks
|
Re: I got a new idea....
looks very good. Now you need a trailer mounted generator to go with it.
|
Re: I got a new idea....
That's looking really awesome!
Love the creativity and detailing that went into this. Markings and dataplates really sell it, and the rectangular panel on the side looks the part of controls or a mounted radio. Better get busy making some scale Plane Spotter Playingcards to get your guys used to quickly identifying profiles... |
| All times are GMT -4. The time now is 01:23 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.