RC Truck and Construction

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)
-   Construction Equipment Tech (https://www.rctruckandconstruction.com/forumdisplay.php?f=7)
-   -   RC4WD/Eagle 360L Channel Mixing Oddity Occurring (https://www.rctruckandconstruction.com/showthread.php?t=13988)

Paulie 07-03-2022 05:51 PM

RC4WD/Eagle 360L Channel Mixing Oddity Occurring
 
Hello,
When I created a mix for these three channels I am only getting "pump off" movement with the bold control stick movements. I am at a loss why the others arent working...

Boom is on ch 1 (pull = up / push = down)
Bucket is on ch 2 (Left = curl / Right = uncurl)
Stick is on ch 3 (pull = in / push = out)


Mix 1 for Boom
"ON"
Master: ch 1
Slave: ch 5 (the pump)
Offset 0
Positive 100
Negative 100

Mix 2 for Bucket
"ON"
Master: ch 2
Slave: ch 5 (the pump)
Offset 0
Positive 100
Negative 100

Mix 3 for stick
"ON"
Master: ch 3
Slave: ch 5 (the pump)
Offset 0
Positive 100
Negative 100

Any help would be greatly appreciated!

Paulie 07-03-2022 07:14 PM

Re: RC4WD/Eagle 360L Channel Mixing Oddity Occurring
 
Disregard, I answered my own question...

Before

https://i.postimg.cc/t4DF7Wpr/7-3-2022-7-31-18-PM.jpg

After

https://i.postimg.cc/tgTW6Jg9/7-3-2022-7-30-35-PM.jpg


All times are GMT -4. The time now is 06:55 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.