RC Truck and Construction

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)
-   Die-Cast Conversions Tech. (https://www.rctruckandconstruction.com/forumdisplay.php?f=11)
-   -   Komatsu D475A Bulldozer 1/50 diecast (https://www.rctruckandconstruction.com/showthread.php?t=9051)

1/50diecast 06-12-2014 08:27 PM

Komatsu D475A Bulldozer 1/50 diecast
 
Just had to try building this dozer. Im still working on it :D
http:// <a href="http://s1086.photob...174615_197.jpg[/IMG]
[IMG]http://i1086.photobucket.com/albums/...174615_197.jpg[/IMG]
http:// <a href="http://s1086.photob...111400_224.jpg[/IMG]http:// <a href="http://s1086.photob...135813_446.jpg[/IMG]
[IMG]http://i1086.photobucket.com/albums/...181356_462.jpg[/IMG]
http:// <a href="http://s1086.photob...174615_197.jpg[/IMG]
Ill have some video soon. All i really have to say about building this is get the model you want to build, then take measurements of the what your going to build. Then get batteries, motors and esc's and receiver that will fit. This 1/50 scale is a little bit on the small size.

1/50diecast 06-12-2014 08:36 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
http://i1086.photobucket.com/albums/...135813_446.jpg

1/50diecast 06-12-2014 08:43 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
http://i1086.photobucket.com/albums/...111400_224.jpg

1/50diecast 06-12-2014 08:45 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
http://i1086.photobucket.com/albums/...175819_925.jpg
My video just click the picture.

doodlebug 06-12-2014 10:29 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
Wow! will be following this micro project.
Cheer's, Neil.

1/50diecast 06-13-2014 10:03 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
Well unfortunately the 2 servos i salvaged from an old rc sabre helicopter that crashed and burned, wasn't compatible with the GWS 4 channel receiver. Other i get some GWS servos and lift the rock ripper and lift the front blade. I was also thinking of getting firgelli actuators and be able to have a tilt on the front blade, but i wouldn't have a ripper control.
I got to say this dozer has some push!!!
Click the picture it a video.http://i1086.photobucket.com/albums/...170540_960.jpg

1/50diecast 06-13-2014 10:11 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
I also need to make a skid plate chassis so the guts dont spill out, it was necessary to cut the bottom out to make some room for the battery and esc and the receiver.

doodlebug 06-13-2014 11:19 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
Cool!
Cheers, Neil.

avel 06-15-2014 11:29 AM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
That's really cool! Makes me want to try and convert a 1/50 diecast construction model so I can run it on my O scale 1:48 shelf layout.

1/50diecast 06-15-2014 10:51 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
Yeah, i plan on converting a dumptruck and a loader at some point. Its just a little expensive to do this, so far this dozer has cost me $320 but im happy with it so far!

1/50diecast 06-15-2014 11:01 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
It was tricky but managed to cram everything into the dozer, now i just have to mount the blade to the servos and i should be done!http://i1086.photobucket.com/albums/...181619_661.jpg

1/50diecast 06-15-2014 11:05 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
My shiny new skid plate
http://i1086.photobucket.com/albums/...154103_046.jpg

1/50diecast 06-16-2014 11:29 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
Well dirt does clog the links, i think ill try running it in potting soil. Got the blade working. Now i just need to make linkage to the ripper. Then some touch up and it will be done.

https://www.youtube.com/watch?v=IxuX...e_gdata_player

4X44DAD 06-17-2014 09:50 AM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
pretty sweet ride very tedious wrk

1/50diecast 06-17-2014 02:27 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
Yes it is, the hardest think is cramming all the electronics in the dozer.
Thanks for all the complements guys :)

1/50diecast 06-18-2014 11:20 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
Well im not digging the servos lifting the blade, i have to hold the channel to keep the blade up or down. So i am thinking of a new approach ill lift the blade with a motor with a screw and nut and another esc.http://i1086.photobucket.com/albums/...200315_676.jpg

1/50diecast 06-20-2014 12:36 AM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
Ok spent the day looking for micro linear ball drive motors, but they only sell to manufacturing companies, so im out of luck. Time to build my own!

1/50diecast 06-20-2014 12:46 AM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
My thoughts are to use a micro motor for micro helicopters tails motors... connect it to a vary small bold the size as the motor shaft and couple it and then couple the bolt with another shaft in a shaft that covers the motor that looks like a hydraulic piston.

1/50diecast 06-20-2014 12:52 AM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
Its going to get interesting

doodlebug 06-23-2014 07:28 PM

Re: Komatsu D475A Bulldozer 1/50 diecast
 
Have you considered converting a servo to 360' full rotation, then the esc is built in.
http://rctruckandconstruction.com/sh...egree+rotation
Cheers, Neil.


All times are GMT -4. The time now is 01:06 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.