6T pinion gear
OK guys, I've been hunting around for a 6T pinion gear with no luck.
Anyone got an internet source for them?? Also, the Tamiya gearbox is 32 pitch, correct? Thanks for any help! |
Re: 6T pinion gear
Not sure where you can buy a pinion gear that small but you can buy 6t pinion wire from Stock Drive Products:
https://sdp-si.com/eStore/ Go to "Gears" and then "Pinion Wire" You need to know the pitch and pressure angle. For approximately $15 you can get 1 foot of brass pinion stock that you can cut pinion gears from on a lathe. Obvously you would need a lathe and way to make the hole/keway. The price adds up quickly because their shipping rates aren't that great and they have a handling fee. |
Re: 6T pinion gear
Try rc4wd.com
|
Re: 6T pinion gear
Quote:
http://store.rc4wd.com/6-Tooth-32-Pi...ear_p_610.html |
Re: 6T pinion gear
Thanks guys!
I tried a search on RC4WD, and all I came up with was an 8 tooth... don't know why... |
Re: 6T pinion gear
Contact hooters chassis http://www.angelfire.com/pa/hootchas/
I just looked, I dont know what happened to my 6t, but pullers tend to use them quite a bit. Nate |
Re: 6T pinion gear
|
Re: 6T pinion gear
@ Tamiya Cowboy... Do you have to make any adjustments to make it fit? After waiting impatiently for almost two weeks, I bought the wrong one off Rc4WD, Thick I am:D
|
Re: 6T pinion gear
So TC, the Tamiya spure Gear is a 32 pitch? Do you know if the 3 speed from the F350 is also 32 pitch? It appears to be, I can say it's NOT 48 or 64 pitch.
LMK |
Re: 6T pinion gear
Yes it is the same pitch as the semi tranny..
|
All times are GMT -4. The time now is 04:04 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.