Newbie
 

Hello Folks,

I'm a newbie to the forum but not to the R/C world. I've had Tamiya RC cars and truck since I was a kid. I've always wanted a tractor trailer so I finally got around to spending the money and got a great deal on a grand hauler.


I haven't done much other than open the box and thumb through the instructions. I had a local hobby shop order me the multifunction control kit (P/N 56511), so when that arrives I need to have them set me up with a 6 channel control unit. I really cant wait to start the build and get my daughter involved in the hobby as well.


I look forward to reading up on what some of you all have done on the forums here, so any suggestion's are welcome as its been a while since Ive built an RC, and the first tractor for me.


Id like to get some more aggressive drive tires on it and add bearings before I start to build it. Anything else I should have that would be easier to do now I welcome the advice.


Thanks for the add,


Sarge

Re: Newbie
 

Welcome Sarge, to this side of the fun hobby. There is a wealth of knowledge on this forum. So dig in and have fun.

Re: Newbie
 

For more agressive drive tires, IMO nothing beats the Lesu tires! They can be found on www.rcmart.com as well as some AWESOME rear wheels to put them on.

Re: Newbie
 

Thank you for the link. I ordered some drive tires, and a few other things while I was on the site and its coming from across the globe.

How was the shipping, I paid for the quicker trip. Lots of things Id like to have for it on that site, I can tell this will be a long project with lots of upgrades.

I saw a member here had aluminum frame trusses but I cant find the thread now. Can anyone point me in a direction?

Sarge

Re: Newbie
 

There’s these.

https://www.asiatees.com/display?-1/...d=108826&pid=1

Re: Newbie
 

Thank you...those are the ones.

It sure would be nice to have a hobby store with competitive prices here in the states, the wait kills me and I always try to by quite a few items to make it worth while for the extra shipping costs.

Sarge

Re: Newbie
 

I as well DON'T have a LHS that stocks these truck parts. There are other RC things available at the nearest one to me. The shipping costs make it necessary to order as much as one can afford to in one order.

Those frame cross members from Hercules Hobby look amazing! I may have to try & acquire a few of those for my projects.

I think you'll get much enjoyment out of those tires! I have them on my rigs, as do most of the guys that are PNWSTE club members.

Re: Newbie
 

Sarge, I'm not sure what geographical region you're from. If you happen to be from the westernmost states in the USA you might enjoy PNW Scale Truck and Equipment, PNWSTE we call it for short. If you're farther east in the states there are other clubs/groups around that are into the RC trucking & equipment fun.

Re: Newbie
 

Im on the east coast in Upstate NY. I found a guy about 1/2 hour from me that has a small hobby shop but doesn't stock much for the Tamiya stuff. I was able to order some stuff from him and picked up my radio and HD servos from his as well. Ill use him when I can, but the online prices are pretty hard to beat.

Sarge

Re: Newbie
 

I just received my first batch of parts from RC Mart, just waiting on the second batch and I think Ill start building.

Sarge

Re: Newbie
 

I'm anxious to see the pictures

Re: Newbie
 

So I did get started building the truck and of course I hit a road block on step 1. I was trying to set up the radio and electronics, come to find out the Spectrum DX6 I was sold isn't really as compatible with this set up as it was pushed to be so Im on the hunt for a new radio and receiver.


I started some chassis work, got my HD servos installed and figured Id show off some of my extras I bought too. Its going to be a long process to build this truck since I don't really get too much time to myself. I mostly enjoy building them I don't really use them as much as I should, maybe when my 3yo daughter gets a little older and she stops destroying the cars I buy her.


Anyway heres a couple of pictures of where Ive gotten to so far:

Re: Newbie
 

Hey Sarge,

Welcome to the forum!

Glad you've picked up a truck so quick. I've been here for 7 years and only drawn lots of CAD and ordered a few parts :lol:

About your order from RCMart, how long did it take to get to your place? I am also looking at buying a truck from them and shipping it to Vancouver, Canada.

Thanks!

Re: Newbie
 

It took about 2 weeks even with express shipping.

I've been eye balling the Grand Hauler kit for years just never set any "me money" aside to buy it. This year I decided to do it. I don't ever buy or do anything for myself so I bit the bullet.


The only regret is wishing I did more research of my own regarding a radio, but I took the hobby shops word for it. Back to the drawing board on that I suppose.

Sarge

Re: Newbie
 

Do yourself a favor, & get at LEAST a 10ch radio. I started with a Spektrum 4ch. Soon I outgrew that & needed more channels. I then graduated to a 6CH radio, & fastly outgrew it. I recently ordered me a 10ch radio. HOPEFULLY this one will last more than a year BEFORE I need more channels!

Re: Newbie
 

Thanks Skeeter for the advice. I'm curious what is the make of the 10 Channel radio you're buying and are they basically geared toward the aviation side of the hobby. I have Futaba style servos and the Tamiya control module has the same style connectors. Does someone sell an adapter to go from a Futaba type connector to a Spectrum receiver?

So for all the questions and I'm sure the answers are right under my nose but I guess I've just been away from the hobby too long or I just never built anything this complicated.

I only want to spend the money on a radio and receiver 1 more time so Id like to not make another mistake.

Sarge

Re: Newbie
 

What radio did you get? I use several different Spektrum radios myself... as far as plugging into the rx (receiver), just trim the tab off the servo plug & it should fit right into the Spektrum rx.

Forum doesn't host pictures, you need a 3rd party site to link from. I use https://postimages.org no sign up, no cost, just upload pics from my pc, choose 1024x768 size, then grab 'Hotlink for forums' to paste into your reply.

Re: Newbie
 

I believe its aDX6 or DX6E, Ill have to look when I get home. I know when I fired it up its basically preset for aviation models. I didn't read the bible it came with because I was a little discouraged. Spending some time on the net last night it appears as though anything over a 4 channel radio is basically for aviation, so I guess at this point there is no sense in spending anymore money.


Thank you for the tip on the servo connectors as well, Ill take another look at that too.


Sarge

Re: Newbie
 

Im pretty sure its a DX6, Id have to look when I get back home. I did a lot of reading last night and it looks like all the radios that are 4 channel and up are geared towards the aviation side of the hobby so I guess Ill try and make what I have work for now.

Thanks for the tip on the trimming of the servo connector.

Sarge

Re: Newbie
 

4ch is enough for basic functions.. forward, reverse, steering, tipper operation and maybe lights. TBH, enough for a tractor trailer. The problem could arise if you decided to get another model, or you want to transport something like a multi function chipper, or a log crane, or use diff locks, lights, horn... a lot of things...

I ordered a flysky 6 ch model, (a very helpful member recommended it), and noticed it can be updated to 10 ch.. so, basically.. that should cover a lot of things...