Transmission Troubles
I was working on the electronics package getting my wires for lights figured out. I noticed my transmission making noise, So I grabbed my shifter linkage and moved it, The noise went away. Then I bumped my throttle lever and noticed I had no drive at all.
I haven't taken the transmission out yet. Do these things break down this often with the kit motor? |
Re: Transmission Troubles
My transmissions have yet to break - and they're a few years old. No drive sounds like the trans is not in gear.
|
Re: Transmission Troubles
hi, there i have 2 trucks #1 has all metal upgrade with metal tranny case and also has the full locking diff rear locking axle set up #2has the automatic tranny with individually purchased rear locking diffs (i just love the automatic so much speed is really nice).both trucks locking diffs have not been set up to servos yet will be one my first projects but truck 1 the tranny seems to be slipping :eek: so i am gonna try a stock one :cool: but i do have a second spare if you need a gear :D
|
Re: Transmission Troubles
Well I had some time today and sat down with the truck on its side. I have been working on the Sound and Lights so I had unplugged the shifter servo and was rotating it by hand. I noticed that there was maybe 1/8 inch of the shifter rod showing. When I pushed it all the way in, and gave it a blip of throttle, the drive wheels began spinning. So I am good! So thanks everyone who replied offering help.
|
Re: Transmission Troubles
Glad to hear that it's working. :)
|
All times are GMT -4. The time now is 05:15 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.