D11 project Hydraulic help required
 

Hi Guys, I have started to make a 1/14.5/1/15 scale D11 but has anyone got any info for the hydraulics other than the ones used in the Wedico models? as I think they will be to small.
Thanks Paul.

Re: D11 project Hydraulic help required
 

DirtPusher9 Joe used the same in his D9R Dozer build and they work just fine i don't know if they were weidico or limbach/stahl but any how they were for the 1/14 scale and his dozer is 1/10 scale

Re: D11 project Hydraulic help required
 

Hey Paul
There are about three types out there
Liembach > 10 bar
Robbe http://rctruckandconstruction.com/showthread.php?t=1605 > 13 bar
and a 30 bar used on bigger models http://www.fumotec.de/index.html

greg

Re: D11 project Hydraulic help required
 

Thanks for the info guys, I didn't know if the limebach would be strong enough as I have them on the three Wedico models. The exavator will dig to a point and then stall, so I thought maybe a bigger system would be better.
Paul

Re: D11 project Hydraulic help required
 

you can always turn up the pump

Re: D11 project Hydraulic help required
 

If you couldn´t find any suitable cylinders there´s always a possibility to make them, I couldn´t find matching so had to do by my self.
Dan

Re: D11 project Hydraulic help required
 

You can try EC-M