Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

Pretty sure it’s RAL 1007 (daffodil yellow).

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

Nice one thanks ... had a chat online with the seller on Aliexpress and he is going to hopefully do a yellow one for me now. Can't fault his comms, so far been very helpful.

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

Very curious how these perform for the price point.

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

You can see one in action here

https://youtu.be/YFI6OvPbnmM
https://youtu.be/Q8J5CyLFB7s

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

Awesome! What's the Cat 3360 in that second vid? Seemed to do really good digging the stones.

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

The one in the video is a little customized but this is the excavator
https://www.aliexpress.com/item/1-14...747348404.html

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

They run, but longlivity of parts varies from machine to machine. Just keep in mind that with relative low cost machines, one must be prepared for putting in more hours, and money, in service and parts than with the expencive ones. As they say, 'there is no free lunch' ) Note : Loctite 542 thread seal is always useful to have at hand.

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

I can't remember, are you the one that takes the frames and adds in the premacon hydralics?

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

Yeah, that's correct. I've got some experience with the 'Faroe' type excavators, 'RTR' 954 (and similar models Komatsu 270, Cat 336) in 2017, it became clear that they still had some way to go concerning hydraulics and assembly skills. But the frames were ok (with some thigtening up of main joints) and cylinders, possible to ad proper hydraulic pump and valves. Figured out it was better to purchase the machines in kit form, without hydraulics, and assemble everything from the bottom, as I had some tools and experience within the field.
There is the Liebherr 946 that's higher priced and a looks to be a notch better put together, but I've no experience with it.

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

Will let you know how it goes

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

Should be there by the time I get home next month. From the YouTube vids looks like it could maybe do to have a slightly bigger bore cylinder on the bucket as it seems a bit "snappy" or could dial down the valve a bit but might loose a bit of breakout force... Will post up how it goes but for the money looks like a pretty solid machine.

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

I'm finishing up a Cat 339DL been waiting on oil thats been on back order, the model is built well went to gather nice the direction were mostly in Chinese . I got mine off EBAY with shipping for 2200.00 and didn't have to list my life with Allis what ever. AS soon as oil get hear I'll be ready to go , I spent 40+ years operating excavators but been retired 12yrs will see if my thumbs can getR done. After reading the earlier post I'll be looking at pins tomorrow, Thanks for heads up, I'm new to hobby. CAT PUSHER

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

Stumbled across another one on aliexpress

https://www.aliexpress.com/item/1-14....13339.90158.0

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

Monster Mudder, nice find.

Re: Chinese Liebherr 956 & Volvo EC 210BLC
 

I think the chinese products start with cheap price to attract attention.