RC Truck and Construction
Page 6 of 6 « First 45 6
Show 40 post(s) from this thread on one page

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)
-   Construction General Discussion (https://www.rctruckandconstruction.com/forumdisplay.php?f=121)
-   -   Rc4wd 870k wheel loader unboxing and review. (https://www.rctruckandconstruction.com/showthread.php?t=12994)

jack van 02-17-2018 07:37 PM
Re: Rc4wd 870k wheel loader unboxing and review.
 
hope so

liftmys10 02-18-2018 10:37 AM
Re: Rc4wd 870k wheel loader unboxing and review.
 
Quote:
Originally Posted by TheBennyB (Post 162466)
When you are talking about a pressure relief valve, are you talking about the small screw on the fixture that holds the black relief tube off the fluid tank? Mine seems to either have to be tighten down or just spins pretty freely. Doesn't really seem to want to hold a position.
No, what you're describing is the air vent tube.
What I'm talking about looks like this and it is located above the left steering cylinder. You can see from underneath the machine looking up towards the cabin. https://store.rc4wd.com/Pressure-Rel...er_p_2114.html

TheBennyB 02-19-2018 01:41 PM
Re: Rc4wd 870k wheel loader unboxing and review.
 
Quote:
Originally Posted by liftmys10 (Post 162489)
No, what you're describing is the air vent tube.
What I'm talking about looks like this and it is located above the left steering cylinder. You can see from underneath the machine looking up towards the cabin. https://store.rc4wd.com/Pressure-Rel...er_p_2114.html
Ahh yes. That's the pressure regulator not a relief valve right? On my other Eagle machines you have the pressure regulator and an actual relief valve with a needle screw that is adjusted to let pressure out if needed.

https://store.rc4wd.com/Ventilation-...nk_p_1823.html

liftmys10 04-24-2018 01:46 AM
Re: Rc4wd 870k wheel loader unboxing and review.
 
New video.
https://youtu.be/Ng2dQPOM3rk

Cat966c 04-24-2018 11:07 PM
Re: Rc4wd 870k wheel loader unboxing and review.
 
Do I have to have a pressure release valve? Is it absolutely necessary? My loader is going to run the small m3 magom pump

jack van 04-24-2018 11:28 PM
Re: Rc4wd 870k wheel loader unboxing and review.
 
wow yours is still working your lucky haha

Rimrock 04-25-2018 02:52 AM
Re: Rc4wd 870k wheel loader unboxing and review.
 
Quote:
Originally Posted by Cat966c (Post 163800)
Do I have to have a pressure release valve? Is it absolutely necessary? My loader is going to run the small m3 magom pump
Yes. Concerning the small Magom pump, the pressure release valve is placed in the same block as the pump

liftmys10 04-25-2018 05:37 PM
Re: Rc4wd 870k wheel loader unboxing and review.
 
Quote:
Originally Posted by jack van (Post 163803)
wow yours is still working your lucky haha
Like a champ. Not a single issue yet. And you can see in the youtube video, how I use it. It's really moving dirt.
I also have another video on the same day which was 25min long. I purposely put the shorter one on YouTube.

Cat966c 04-25-2018 05:59 PM
Re: Rc4wd 870k wheel loader unboxing and review.
 
Quote:
Originally Posted by Rimrock (Post 163805)
Yes. Concerning the small Magom pump, the pressure release valve is placed in the same block as the pump
So it’s already built in??

TheBennyB 04-25-2018 09:10 PM
Re: Rc4wd 870k wheel loader unboxing and review.
 
Quote:
Originally Posted by liftmys10 (Post 163814)
Like a champ. Not a single issue yet. And you can see in the youtube video, how I use it. It's really moving dirt.
I also have another video on the same day which was 25min long. I purposely put the shorter one on YouTube.
Nice vid, looks like your moving some good amounts of material! Mine is also still running great.

TheBennyB 04-25-2018 09:12 PM
Re: Rc4wd 870k wheel loader unboxing and review.
 
Quote:
Originally Posted by jack van (Post 163803)
wow yours is still working your lucky haha
What you going on now Van?

jack van 10-30-2019 06:39 PM
Re: Rc4wd 870k wheel loader unboxing and review.
 
so has anybody have recomendation for cheap hydrolic oil

Bo Wallen 10-31-2019 08:13 AM
Re: Rc4wd 870k wheel loader unboxing and review.
 
Do NOT use cheap hydraulic oil, Use high-quality oil, and keep it clean. The amount you will use does not break any bank.


All times are GMT -4. The time now is 10:31 AM.
Page 6 of 6 « First 45 6
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.