Scania W.A. Prime Mover 1/14.5
 

Hello Mini Truckers ;)

Danke you for the Messages.

I buy a normaly Wedico Kit in 2007

http://img220.imageshack.us/img220/1577/49508995.jpg

After 3 Yaers construction, is this the result.

http://img137.imageshack.us/img137/3850/img3927gm.jpg

Frame is from Wedico and my self, with Osswald and Wedico Spring also tuned (original to high). The Power Train is with a 82 Watt Faulhaber Engine and a 3-Shift Gearbox from Veroma.

http://img178.imageshack.us/img178/1858/1551ay0.jpg

http://img89.imageshack.us/img89/6417/3689ik0.jpg

The Fuel tank i make with 1mm Alu, inside is a 5 pack Battery from Orion with 5100mAh on each side.

http://img98.imageshack.us/img98/9315/4178ks7.jpg

http://img57.imageshack.us/img57/2372/20086186qu3.jpg

Behind is the charing socket for the Battery

http://img57.imageshack.us/img57/4093/41980860nn5.jpg

http://img227.imageshack.us/img227/6889/66226608pf1.jpg

Inside the Toolbox is the Electrical rearpanel from Wedico


http://img227.imageshack.us/img227/308/54017919oa5.jpg

The Fender are from Wedico and is modifed by me. The Holders i made of Brass

http://img90.imageshack.us/img90/3003/3834aa6.jpg

http://img90.imageshack.us/img90/6553/3824af9.jpg

This is the 1. Part, next Part will follow soon

Thank's Marcel

Re: Scania W.A. Prime Mover 1/14.5
 

great work! It looks awesome

Re: Scania W.A. Prime Mover 1/14.5
 

Wonderful work! A real improvement from the original!

Kerst

Re: Scania W.A. Prime Mover 1/14.5
 

Those are very nice upgrades! :)

Re: Scania W.A. Prime Mover 1/14.5
 

That is a sharp looking truck nice job.

Travis

Re: Scania W.A. Prime Mover 1/14.5
 

WOW!! One of the nicest Scania's I've seen!

Brian

Re: Scania W.A. Prime Mover 1/14.5
 

WOW!!!
Nice job man keep it up and coming.
Greg

Re: Scania W.A. Prime Mover 1/14.5
 

nice upgrade work!
certainly has the right look
for down under!

Re: Scania W.A. Prime Mover 1/14.5
 

Oh, thanks im Surprised about your answers :rolleyes:

In this Part i show you my Aussie Attachments, all of this i made by my self because it gives no Dealer for this Part's.

Airintake & Exhaust

http://img228.imageshack.us/img228/9753/49181jm2.jpg

http://img228.imageshack.us/img228/6378/49321bp5.jpg

http://img148.imageshack.us/img148/9711/49621ku1.jpg

http://img243.imageshack.us/img243/9463/49971of3.jpg

The Exhaust is from Wedico (Century) but i must modyfied the Pipe, because it was to smal :D

http://img243.imageshack.us/img243/8536/img49801ci7.jpg

Stoneguard for Windscreen

The Frame is Alu and the Net is from a frying pan oil guard (i hope this is corect).

http://img137.imageshack.us/img137/5224/1000ku1.jpg

http://img137.imageshack.us/img137/2231/1002tf9.jpg

http://img137.imageshack.us/img137/3504/1003qr1.jpg

Bull bar (Roo bar)

It beginns with a Aluminum Block like this

http://img136.imageshack.us/img136/4738/94447342qp4.jpg

after lot of hours at the metal milling and drilling it would by like this

http://img75.imageshack.us/img75/7442/48271kr9.jpg

http://img75.imageshack.us/img75/319/48161ux0.jpg

http://img193.imageshack.us/img193/5605/9221g.jpg

http://img193.imageshack.us/img193/5348/9201.jpg

The Road Train sign is covered by a magnetig Plate

http://img193.imageshack.us/img193/6944/9211s.jpg

http://img21.imageshack.us/img21/8623/img11861h.jpg

I know the Bull bar is not 100% Scale, it is a combination of 5 Bullbar's ;)

Thanks Marcel

Re: Scania W.A. Prime Mover 1/14.5
 

Looking Good Marcel! I really like all the parts you milled! You have skill.:D

Re: Scania W.A. Prime Mover 1/14.5
 

That bar is very functional and well built. I like the lights and the magnetic plates. And yes the frying screen is good stuff, it even comes in stainless if you aren't painting. :)

Re: Scania W.A. Prime Mover 1/14.5
 

man talking about some nice upgrades wow! keep up the awesome work

Re: Scania W.A. Prime Mover 1/14.5
 

Great job so far keep it up.
Greg

Re: Scania W.A. Prime Mover 1/14.5
 

Thank You :)

The Parts need lot of time. Measured, design and made. Some i must made twice ;) .

After finish the Construction i painted the Frame in RAL 7021 is similar like original Scania Frame Color.

First Primer

http://img12.imageshack.us/img12/8379/46557366.jpg

Second Color

http://img12.imageshack.us/img12/5696/83111880.jpg

http://img12.imageshack.us/img12/3534/83937790.jpg

The Weels from Leimbach and Fifth Weehl is from Tokle.

http://img219.imageshack.us/img219/5100/50811.jpg

Scania Wheel Hub

red=Leimbach Wheel Hub
blue=New Scania Wheel Hub

http://img136.imageshack.us/img136/8246/scanianabe3.jpg

http://img136.imageshack.us/img136/7448/50661.jpg

Next Part Follow soon, thanks Marcel

Re: Scania W.A. Prime Mover 1/14.5
 

Holy crap that is awesome work. Very good looking truck. I can't wait to see more.

Re: Scania W.A. Prime Mover 1/14.5
 

This is a beautiful looking Scania! I really like your eye for detail and the custom parts you made for it. This is what a Wedico should be. Seeing your truck completed, and how great it turned out, I can say the three years of building is well worth the effort and wait. I've been building my own Wedico, on and off, for 4 years, so now I don't feel so bad about it taking a long time!

Looking forward to seeing more photos!

Re: Scania W.A. Prime Mover 1/14.5
 

That is a great looking truck. Kind of makes me want to get a Scania.

Re: Scania W.A. Prime Mover 1/14.5
 

Thank You for the compliments

i had few interruptions between the Construction stages . sometimes I built a little bit the Trailers ;) .

Re: Scania W.A. Prime Mover 1/14.5
 

There is really big differance with the standart kit and your truck. It is really lovely scania !

Re: Scania W.A. Prime Mover 1/14.5
 

Thanks

In this Part i show you some modification about the Cab. First i made a Alu plate for reinforcement the Cab, of course also for the new Cab look. The Alu plate have the same high like the Original Cab.

http://img71.imageshack.us/img71/8619/1000ss8.jpg http://img204.imageshack.us/img204/8410/11og6.jpg

I modified also the Mudguard

http://img217.imageshack.us/img217/4742/41118.jpg

The Cab look i made in Brass and is functional.

http://img403.imageshack.us/img403/9200/75533715yu8.jpg

http://img403.imageshack.us/img403/6838/83361403jr2.jpg

from the inside it looks like, he works like a sliding mechanism.

http://img403.imageshack.us/img403/354/81399053oi7.jpg

the new Cab entry

http://img218.imageshack.us/img218/5406/3643cf2.jpg

I need a another Cockpit for down Under because of the right hand drive. My Dealer in Swtzerland show me a RHD Wedico Cockpit (i was surprised, but Wedico made this for the british market). But the problem was the same it was too flat. After this i made one in ABS it looks better than the Original Wedico but it was lot of work.

http://img16.imageshack.us/img16/6172/5867.jpg

http://img16.imageshack.us/img16/9758/5873c.jpg

http://img16.imageshack.us/img16/9572/5883.jpg

I modified also the Mirrors, the Wedico's are not bad but a litttlebit square

http://img27.imageshack.us/img27/5870/58961d.jpg

http://img27.imageshack.us/img27/7558/59031.jpg

The mirror effect are from a ABS-Mirror plate that i find by a Dealer.

http://img27.imageshack.us/img27/6697/59261.jpg

At the Next Part i show you som kinds of unforeseen ?