Oshkosh M1070 HET 1:16
 

This is my new project, regards
[IMG]http://i58.tinypic.com/15dvyud.jpg[/IMG]
This is the real model
[IMG]http://i58.tinypic.com/29auuyx.jpg[/IMG]
[IMG]http://i59.tinypic.com/af8ysm.jpg[/IMG]

Re: Oshkosh M1070 HET 1:16
 

Nice start

Re: Oshkosh M1070 HET 1:16
 

Looks good!

Re: Oshkosh M1070 HET 1:16
 

I put more progress, the roof over the absence of some details, tell you that is held by magnets, so you can easily get inside for the electronics, also I have made the case for batteries, boilers, air conditioning the ceiling and ladders fuel tanks, I have also started with the back, making a deposit bearing (not that it is) also the exhaust, I hooked him a gondola I have a Peterbilt for the size that will have, in total with its gondola 1m 45 cm
http://i57.tinypic.com/eqds2c.jpg[/IMG]
http://i60.tinypic.com/21d4lfd.jpg[/IMG]
http://i61.tinypic.com/243qez6.jpg[/IMG]
http://i59.tinypic.com/dfhafa.jpg[/IMG]
http://i60.tinypic.com/30bhjr8.jpg[/IMG]
http://i60.tinypic.com/34hyvie.jpg[/IMG]
http://i58.tinypic.com/23r38jk.jpg[/IMG]

Re: Oshkosh M1070 HET 1:16
 

looking great

Re: Oshkosh M1070 HET 1:16
 

Is that Tamiya Leo, or Heng long?

Re: Oshkosh M1070 HET 1:16
 

This looks great, what axles are you using?

Re: Oshkosh M1070 HET 1:16
 

Thank you all for your comments. Kaptain Jack is a modified Heng Long Leopard, I have changed the electronics, I've removed the engine rotation of the turret and I have placed a servo modified to turn faster, also I've put a system so that the cables can not roll up as it rotates 360 degrees, well you I put pictures and comment, a greeting
[IMG]http://i60.tinypic.com/2i2ahpw.jpg[/IMG]
[IMG]http://i60.tinypic.com/29xwlf.jpg[/IMG]
[IMG]http://i60.tinypic.com/rroweq.jpg[/IMG]
[IMG]http://i61.tinypic.com/2a8q7gz.jpg[/IMG]
[IMG]http://i57.tinypic.com/2ptz1jo.jpg[/IMG]
[IMG]http://i59.tinypic.com/2rxduhk.jpg[/IMG]
[IMG]http://i60.tinypic.com/2gwvsqw.jpg[/IMG]
[IMG]http://i58.tinypic.com/4hfhmp.jpg[/IMG]
When you finished with all the exterior details begin with the interior of the cabin, so I still have plenty of work abroad, greeting

Re: Oshkosh M1070 HET 1:16
 

So cool! Can't wait to see it with paint.

Re: Oshkosh M1070 HET 1:16
 

WOW I like that a lot. You are very talented

Re: Oshkosh M1070 HET 1:16
 

I like the side by side view, looks huge

Re: Oshkosh M1070 HET 1:16
 

Nice details - kool.

Re: Oshkosh M1070 HET 1:16
 

Thank you for your comments, I could not move forward, but I put a picture of the work done, a greeting
[IMG]http://i62.tinypic.com/6gkc51.jpg[/IMG]
[IMG]http://i57.tinypic.com/25sswa8.jpg[/IMG]
[IMG]http://i57.tinypic.com/166m5aa.jpg[/IMG]
Hex screws are completely handmade home
[IMG]http://i61.tinypic.com/1ex35e.jpg[/IMG]
You see the floor is a diamond plate
[IMG]http://i60.tinypic.com/14m5oxv.jpg[/IMG]
Both deposits of oil as the hydraulic tank are completely hollow and cover so you can take advantage of the room to get some electronics
[IMG]http://i61.tinypic.com/2dcejb5.jpg[/IMG]
I still have a lot of work to do, and I arrive Monday wheels for low-bed trailer, well you will put more progress, a greeting

Re: Oshkosh M1070 HET 1:16
 

I put pictures of new developments, a greeting
[IMG]http://i59.tinypic.com/33cbtom.jpg[/IMG]
[IMG]http://i62.tinypic.com/6e2053.jpg[/IMG]
[IMG]http://i61.tinypic.com/2j2i1jc.jpg[/IMG]
[IMG]http://i62.tinypic.com/xb012o.jpg[/IMG]
[IMG]http://i60.tinypic.com/mcssd1.jpg[/IMG]
[IMG]http://i59.tinypic.com/juzdkw.jpg[/IMG]
[IMG]http://i60.tinypic.com/11kd24o.jpg[/IMG]
[IMG]http://i62.tinypic.com/2ptvtj7.jpg[/IMG]
You can see the mess of the worktable ;)
[IMG]http://i57.tinypic.com/2vke3a9.jpg[/IMG]
[IMG]http://i58.tinypic.com/kdn7nl.jpg[/IMG]
[IMG]http://i57.tinypic.com/5z4468.jpg[/IMG]
[IMG]http://i60.tinypic.com/i4msux.jpg[/IMG]
At the joints see excess putty to be sanded
[IMG]http://i58.tinypic.com/mjbhap.jpg[/IMG]
The low bed trailer will measure 94 cm
This is how it will look when the low bed trailer is hitched, will total length of 1m 43 cm

Re: Oshkosh M1070 HET 1:16
 

Beautiful work. Wish I had the time and talent for something sweet as this! Glad you stayed on it and looks like it's downhill from now.





Jeff

Re: Oshkosh M1070 HET 1:16
 

Wow, love your talent and engineering :-)

Re: Oshkosh M1070 HET 1:16
 

Being in Wisconsin i see these things all the time on the freeway on the back of flatbeds on the way for delivery. You definitely have fab talent because yours looks just like it!

Re: Oshkosh M1070 HET 1:16
 

That is a great build, nice work on getting so much detail on it! I can't wait to see more progress pics!

Re: Oshkosh M1070 HET 1:16
 

I can only echo the praise for your work, from others here. I look forward to seeing this completed.

Re: Oshkosh M1070 HET 1:16
 

Hello, this project was stopped for various reasons, but I've got it back on track, I put a video of the first test run
https://www.youtube.com/watch?v=3CON...ature=youtu.be
It is not going very well reverse because the variable speed drive is quite abrupt, when I finish take de Tamiya MF01 installed, a greetings