Barebones E11
 

Ok guys here are some pic of the bulldozer sorry about the quality I was in a hurry but I will get better ones. I'm working on this with my dad at his shop we are going to start with the tracks and carring rollers
http://i1379.photobucket.com/albums/...psqugqntla.jpg
http://i1379.photobucket.com/albums/...pssyhcghwd.jpg
http://i1379.photobucket.com/albums/...psahe68edn.jpg

Re: Barebones E11
 

I am a lil confused after checking their website out the Pics above look a lil short of what they advertise on their site as far as the quality of workmanship you get when you purchase from them .

Re: Barebones E11
 

CALLING cooper!!!!

what are your thoughts a$$ load of work to make it r/c or $2000 load for a lowboy?

Re: Barebones E11
 

I think on the web sit thay measure it with the riper on it I have the ripper remove in these pic

Re: Barebones E11
 

Yes it will be a lot of work but in the end I think it will be sweet! I think it's a good shell to start with

Re: Barebones E11
 

Good Job Friend :-)

Re: Barebones E11
 

Any way you can take the top off, and the cab part to take a pic of inside area? And how wide is it in there? If enough room for the motors I put in the d11 that would be great, couple years so far and a lot of hard pushing they have been powerhouses!! Windshield wiper motors from robot market place, left and right. I did have to gear them down and alter output shafts but well worth it.

Re: Barebones E11
 

I have been away for a while, who makes this model?

Re: Barebones E11
 

barebones the guys that make the cat 390 excavator

Re: Barebones E11
 

Hay cooper I have some great pics of the inside of the dozer but I'm having trouble with photo bucket on my phone. The inside of it is 5 in wide I hope that that is enough room for motors like u put in yours. I will get this photo bucket thing fix and get pics up thx for looking

Re: Barebones E11
 

UPDATES!!!!!

Re: Barebones E11
 

Nothing yet been building a house not much time for hobbies at the moment��

Re: Barebones E11
 

http://i1379.photobucket.com/albums/...pszehx6dza.jpg
http://i1379.photobucket.com/albums/...psgnero5jz.jpg
http://i1379.photobucket.com/albums/...ps88qcnqk6.jpg
http://i1379.photobucket.com/albums/...psykqyt5ij.jpg
Small up date on the dozer made new rollers and got new chain for the tracks it should hold up better then what was supplied with the model i hope thx for lookin

Re: Barebones E11
 

http://i1379.photobucket.com/albums/...psepgutrlj.jpg
Under carage almost done
http://i1379.photobucket.com/albums/...psfw3brm3q.jpg
Made a simple jig to hold the chain and the track pad square going to start welding going to need a spray bottle of water to keep wood cool but it should work

Re: Barebones E11
 

only real problem I see so far is they didn't add a track tensioner assembly

Re: Barebones E11
 

The front idler is adjustable but it's not spring loaded

Re: Barebones E11
 

That's not good.