RC Truck and Construction - Hydraulic System

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)

- Construction Equipment Tech (https://www.rctruckandconstruction.com/forumdisplay.php?f=7)

- - Hydraulic System (https://www.rctruckandconstruction.com/showthread.php?t=11132)

stevec

01-26-2016 03:20 PM

Hydraulic System

Hi all, am going to change my Telescope Cylinder on my tipper for two rams the ones off a 4200xl but were should i mount them at the front or at the back

Lil Giants

01-26-2016 03:23 PM

Re: Hydraulic System

You building a scissor hoist or just a straight push?

stevec

01-26-2016 03:41 PM

Re: Hydraulic System

just a straight push

Lil Giants

01-27-2016 11:28 PM

Re: Hydraulic System

...no pic & vague info... what is it you're doing exactly? Is this a bobtail or a trl? Box length?

thetractorfan

01-29-2016 12:00 PM

Re: Hydraulic System

you should put the cylinder on a partial angle and try extending it in various positions to find the best spot. it should be so the cylinders lower on an angle so the dump bed can lower as the cylinder does without any problems. it`s better to measure and do the math than to guess and end up with a fault.

All times are GMT -4. The time now is 06:18 PM.