Bruder mack race truck on tamiya man 6x4 chassis
 

Here are some pics of of my fun build,
Pics not in any particular order,
The front leaf springs were raised and moved FWD , pink shocks on front were removed , the axle moved about 15mm FWD as well and lp tyres added to get the wheel in the right hieght relative to the hood as it looks wrong with a normal axle/spring set up...............
There are some photos of a tamiya siler can hooked to the 16-1 planetary box that was replace with a Hobbywing 13.5t brushless motor and matching esc...................
Decided to put the interior cab lights and bumper lights on different on/off switches so its easier to control both of then....
And I made a front break for it so its easier to do burn outs............
https://scontent-dfw1-1.xx.fbcdn.net...d1&oe=581F8A81
https://fbcdn-sphotos-c-a.akamaihd.n...cc80f6f4d1ab57
https://fbcdn-sphotos-e-a.akamaihd.n...56071c7a2577e3
https://scontent-dfw1-1.xx.fbcdn.net...4c&oe=57EFDD00
https://scontent-dfw1-1.xx.fbcdn.net...ca&oe=5826576E
https://fbcdn-photos-d-a.akamaihd.ne...675b21bf4aab94
https://scontent-dfw1-1.xx.fbcdn.net...f4&oe=5832ACF3
https://fbcdn-sphotos-c-a.akamaihd.n...41121b5c62e64a

https://fbcdn-photos-c-a.akamaihd.ne...57ae29431e5962
https://scontent-dfw1-1.xx.fbcdn.net...a0&oe=58265913
https://scontent-dfw1-1.xx.fbcdn.net...c7&oe=57F279A4
https://scontent-dfw1-1.xx.fbcdn.net...f2&oe=581ED611
The next video is before I got a program card for the esc and adjustested a few setting,
https://www.facebook.com/tracy.ingli...1647963581509/
https://fbcdn-photos-d-a.akamaihd.ne...00deb9dd87633b
https://www.facebook.com/tracy.ingli...45343214268549
The other reason I ended up getting a program card for it its easy to set up the esc instead of trying to keep track of the flashing light sequence and you can see what the values are for everything,,,,,,,,,,,,

Cheers Tracy

Re: Bruder mack race truck on tamiya man 6x4 chassis
 

Nice build Tracy, thanks for posting!