End Dump Trailer and Dolly
 

I got started on this a couple of days back. There is still a fair amount of work to do but it is coming along. Eventually, I will be building a matching dump box for the truck as well.

http://i1293.photobucket.com/albums/...pshrmhmmln.jpg
http://i1293.photobucket.com/albums/...pshqoxzyia.jpg
http://i1293.photobucket.com/albums/...psmlyujiag.jpg
http://i1293.photobucket.com/albums/...pse5su4ktf.jpg

Reg

Re: End Dump Trailer and Dolly
 

Is that normal up there? ? Seems a little long
To go behind a dump truck

Re: End Dump Trailer and Dolly
 

I don't know what the rules are in Alberta.:confused: The box is 24". Scales out to 28' i think. You know me, I just try to build what I'm asked to.lol I think it will be OK as the truck is a tri-drive and will have a 19" dump box. It's gonna haul a lot of dirt all together!

Re: End Dump Trailer and Dolly
 

H€ll yeah!! We have a few baby dumps down here
They did heavy dirt over the bridges

Re: End Dump Trailer and Dolly
 

Going to be following this one :) Already looks good keep it up!

Re: End Dump Trailer and Dolly
 

Hey Mark I thought they did away with the 120 permits there and 80 was the max especially going over the bridges?

Re: End Dump Trailer and Dolly
 

Sweet Reg! Hoe much does a dump trailer like this cost without the tarp set up?
Ken

Re: End Dump Trailer and Dolly
 

they dropped the 120 down to 117 with a 3% grace= 120 LOL

Re: End Dump Trailer and Dolly
 

With or without the dolly?

Re: End Dump Trailer and Dolly
 

Wow reg! You just keep impressing me with your builds!! Looking pretty good!! I have to go revisit your skidded thread, I realized I could use one. Every time the wind blows small branches fall, and after watching one of your videos I realized that would be perfect for skidding branches!! Build another one of them and ship it to me for testing. :).

Re: End Dump Trailer and Dolly
 

Oops thought it was rcp compound thread, didn't want to derail the thread, ;)

Re: End Dump Trailer and Dolly
 

Without the dolly.

Re: End Dump Trailer and Dolly
 

Thanks RW. Yes you need a grapple skidder for sure! Probably could use it to pickup "logs" from your Great Dane too.lol

Probably around $1150-$1200USD using a flatbed trailer as a base like this one. In this case the customer already had the trailer so he shipped it to me to modify. That knocks around $200US off.

Tarp is all mounted up now...

http://i1293.photobucket.com/albums/...psjip957is.jpg
http://i1293.photobucket.com/albums/...psopvbhirs.jpg
http://i1293.photobucket.com/albums/...ps9lq9e5i8.jpg

Re: End Dump Trailer and Dolly
 

I was out of the shop for a couple of weeks but have been back working away on this since Monday. Two long work days have this almost ready to go. Just a few small details this morning and then it will be torn down to receive it's velvet black powder coat.

I was asked to fit a stock King rear bumper to the trailer so I modified a stamped steel trailer bumper mount to except the KH bumper. It had to be lowered as well to clear the overhang when the box is up. The owner has a nice new bumper to put on. This old beater was just installed for testing...

http://i1293.photobucket.com/albums/...ps2wle2gn6.jpg
http://i1293.photobucket.com/albums/...pswg8hiipq.jpg
http://i1293.photobucket.com/albums/...ps3g1morve.jpg

Up front the "quad wagon" needed some shorty fenders so I made those up. I also made a plate to cover over the open frame. I gave a final "trim" to the ladder as well and mounted it up.

http://i1293.photobucket.com/albums/...psccfewwjy.jpg
http://i1293.photobucket.com/albums/...psvejonjvf.jpg
http://i1293.photobucket.com/albums/...pskbdrj7zh.jpg

Next up was the dolly. I was provided a perfect set of KH rails with the axles but rather than waste them I decided to make a new set and only drill the necessary holes for a cleaner look.

http://i1293.photobucket.com/albums/...psbbvtyrxo.jpg
http://i1293.photobucket.com/albums/...psouyhyikb.jpg

Once the rails were ready and installed I got started on the drawbar and mount.

http://i1293.photobucket.com/albums/...ps6jpalucz.jpg
http://i1293.photobucket.com/albums/...psxedwlm7t.jpg

And finally, after making a couple of pintle hooks, a few pictures outside!

http://i1293.photobucket.com/albums/...ps2ovd08ku.jpg
http://i1293.photobucket.com/albums/...psokknkh2s.jpg
http://i1293.photobucket.com/albums/...pslvxzs8d5.jpg
http://i1293.photobucket.com/albums/...pstrrohzrd.jpg
http://i1293.photobucket.com/albums/...ps2ovd08ku.jpg
http://i1293.photobucket.com/albums/...psiigcfzxj.jpg

Re: End Dump Trailer and Dolly
 

Looks great Reg. I'm building the same basic set up to pull behind my 6x6 dump, yours looks a lot better :D but Im having fun with it. I'm attempting to make my draw bar interchangeable so I can run the long stinger pulling the dump and a standard short hitch for pulling a set of doubles with the same dolly.

Re: End Dump Trailer and Dolly
 

Awesome setup Reg :cool:

Re: End Dump Trailer and Dolly
 

That's a great idea! So where's the pictures? We wanna see!


Thanks Brandon. It's in at the coating shop now so we'll see how she oolks when I get it back and reassembled. I already know that I want one for myself.:D

Re: End Dump Trailer and Dolly
 

Here's the link Reg, I didn't want to muck up your thread :D
http://www.rctruckandconstruction.co...656#post147656

It's post #101.

Re: End Dump Trailer and Dolly
 

Well she's all done and looks very nice!

http://i1293.photobucket.com/albums/...ps9ihvz66t.jpg
http://i1293.photobucket.com/albums/...psujfyvie0.jpg
http://i1293.photobucket.com/albums/...ps4ofqszh8.jpg
http://i1293.photobucket.com/albums/...psevfpey2b.jpg
http://i1293.photobucket.com/albums/...psk7lxhggx.jpg
http://i1293.photobucket.com/albums/...ps8ybragwb.jpg
http://i1293.photobucket.com/albums/...pshxaybnj1.jpg
http://i1293.photobucket.com/albums/...psxyig3wfy.jpg
http://i1293.photobucket.com/albums/...ps461rlerq.jpg

Walk around video

https://www.youtube.com/watch?v=xrffMcV_XO8

Re: End Dump Trailer and Dolly
 

Told you mine never looks that good!:cool::cool::D