Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

I've looked at the Tamiya Globe Liner for years before I finally broke down and bought one, I always liked cab over engine semi trucks. This build Im posting took place over a couple years. I bought my kit from RC Mart as it was the best deal with shipping to Canada at the time. I ordered the truck, Futaba 4YWD 2.4 radio, and the Tamiya Multi Function Control Unit along with a couple basic servos to get me started.

https://i.imgur.com/COr5G7Bh.jpg

https://i.imgur.com/6xxBiDch.jpg

I bought Knight Hauler frame rails a couple years ago as I've had the idea of a stretched Globe Liner for sometime. I had to drill and tap a few mounting holes to make it work. Here's a bad pic of first assembly.

https://i.imgur.com/xeoWBPOh.jpg

Laying things out for a custom front end. Headlights are cut down from the rear bumper lights. You can also see the mount I built for the speaker behind the grill.

https://i.imgur.com/6zIBXawh.jpg

Filler piece made and I made the grill from aluminum sheet and the factory mesh.

https://i.imgur.com/mVId7dLh.jpg

I also moved the front axle forward and started the body work to move the wheel well forward to match.

https://i.imgur.com/h7pKG6Dh.jpg

Filler piece made to reshape wheel well.

https://i.imgur.com/4UKgbQNh.jpg

Made a frame rail cover from aluminium, drilled and tapped frame rails to mount it.

https://i.imgur.com/aeGtIXoh.jpg

And started painting some parts, primed then sprayed some Tamiya Red.

https://i.imgur.com/k7DIll0h.jpg

Here she is after some paint, still only rear wheel drive at this point.

https://i.imgur.com/yq824zwh.jpg

https://i.imgur.com/1egeEL6h.jpg

More to come

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Here's the Tamiya TLT axle mounted. Don't mind the JBL weld, I replaced the cracked axle housing later on. You can also see how I mounted the front leaf spring mount, this is how I moved the front axle forward. I used aluminium round bar thru the front bumper mount with a screw from the top side to hold it in place. And to get the front ride height just right I shaved some of the plastic from the axle housing where the leaf mounts to it and I also removed a leaf to get the front end lower.

https://i.imgur.com/h2OthLzh.jpg

I also moved the tranny rearwards in the frame to allow a workable angle for the front drive shaft. Here you can also see the mount I built to hold the MFC unit under the cab. The speaker is in the front between the seats. I also added new LESU tires

https://i.imgur.com/b6ZfONEh.jpg

I lengthened the 3 speed output shaft on the front by building it up with my welder and shaping it on the bench grinder. This gave me a mounting point for the front drive shaft. Shafts were made from traxxas and axial parts.

https://i.imgur.com/Miy4C82h.jpg

Axle shaved,alloy C hubs installed and painted. Also notice how i mounted my MFC control board in the gas tank.

https://i.imgur.com/jHgzcIZh.jpg

And after lots of masking here's the final paint job.

https://i.imgur.com/1sTij7Nh.jpg

New front bumper as well

https://i.imgur.com/6VhMzODh.jpg

Testing out the 6 wheel drive

https://i.imgur.com/9IhUJBAh.jpg

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Next up was the trailer build, Tamiya Flatbed. As a first time builder of one of these I was surprised by the all the parts in the trailer kit.

https://i.imgur.com/pDNNjiwh.jpg

Finished build out in the snow, alloy wheels on the trailer.

https://i.imgur.com/q48JZRKh.jpg

https://i.imgur.com/4rMYoggh.jpg

https://i.imgur.com/byOqhbGh.jpg

I knew when I got the trailer that I'd be making it longer for a more scale look. Mounting up suspension to new trailer frame, I like my axles all the way to the back.

https://i.imgur.com/DvvtxvGh.jpg

https://i.imgur.com/thQ3lBjh.jpg

The stretch

https://i.imgur.com/AB3pzcQh.jpg

https://i.imgur.com/hziGjMlh.jpg

Building new deck using aluminium and Tamiya wood deck planks

https://i.imgur.com/YsLnJtxh.jpg

I also polished all the aluminium

https://i.imgur.com/wKeVXggh.jpg

Stickers added for some detail and a coat of varnish on the planks

https://i.imgur.com/RdxfoD6h.jpg

https://i.imgur.com/e2ynyPth.jpg

https://i.imgur.com/uEeLoRNh.jpg

The polished aluminium really pops in the sun

https://i.imgur.com/nXCFnpOh.jpg

https://i.imgur.com/bSAOZcXh.jpg

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

As happy as I was with the flatbed trailer build I really wanted a low boy so I got the RC4WD lowboy designed by SemiJoe. This is the trailer I wanted from the beginning but I could not justify the price at the time. But Tower Hobbies started selling these so I was able to use member discounts and Easy Pay to ease the pain lol...but I'll probably still end up selling the flatbed.

https://i.imgur.com/LZo4PzMh.jpg

https://i.imgur.com/uWvfoCPh.jpg

https://i.imgur.com/2DLwEKdh.jpg

https://i.imgur.com/r96ocHCh.jpg

And with a load on, CAT Dozer (Bruder, Non RC, for now)

https://i.imgur.com/tDvjjx5h.jpg

https://i.imgur.com/zG7BfOBh.jpg

https://i.imgur.com/YCGk9xrh.jpg

https://i.imgur.com/gxKu4s9h.jpg

And just for fun, not to scale, SMT10.

https://i.imgur.com/7jlHN8kh.jpg

https://i.imgur.com/0BsLpXZh.jpg

https://www.youtube.com/watch?v=Og0KofVum6k

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

absolutely beautiful..

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

That's a heck of a build.
The cab looks great, and i like all the little details you did

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Thanks guys.

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

A very nice truck and trailers!

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Both the Globeliner and trailers look awesome! Great job the build :cool:

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

That a lot of thinking and it turned our bloody great
Thanks for share how you did things..
Cheers Tracy

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Really nice build. I appreciate the fact your truck is a 6X6 but doesn't look like a crazy oil field or lifted truck, nice job!

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

AWESOME build!!

Nice looking set-up.

-Terry

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Wow.

I'm too busy dusting off my chin from it dropping on the desk. :D

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Nice photography, Nice build too. Love the color scheme.

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Thanks everyone

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Could you please tell me if the front lights on your Globe Liner conversion are the rear bumper tail lights? And if so, what clear lenses did you use please?

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Yes they are. I got them from ebay but I can't remember the Tamiya part number.

These might be them...

https://www.ebay.com/itm/GLOBE-LINER...YAAMXQMXRQ9ASU

I later changed them out for Grand Hauler lights

https://i.imgur.com/3haBmmr.jpg

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Thanks very much

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

I am going to stretch my trailer now lol....great build man.

Re: Tamiya Globe Liner 6x6 & Flatbed Trailer Build
 

Do you still have the flatbed and would you be interested in selling it