2A6 - in bits!
 

Swapped a truck MFU for this and some cash:

http://i1252.photobucket.com/albums/...6/IMG_2045.jpg

http://i1252.photobucket.com/albums/...6/IMG_2044.jpg

Should keep me busy as it came as a box load of bits, someone has started to build it and pulled most of the plastic parts off of the spru's:confused:

There's a few bits missing which should be quite easy to replace, but all the electronics etc were still in the original sealed packets, first thing I did was pull them all out, connect it up and make some tank noises:D

This will be a slooow build so please bare with.
Stu

Re: 2A6 - in bits!
 

nice swap

I have one and run it around the local park on sunny days

Re: 2A6 - in bits!
 

It is certainly one interesting model to build...

I hope you have a ton of plastic and metal bits out of shot though.

At least check the manual and verify which bits you are missing.

Cheers,
AP

Re: 2A6 - in bits!
 

Do you run it with stock motors or something different?

So far I'm pleased with the swap:)

A big box full of stuff:eek:
Slowly going through the book and making a list

Not much progress on the actual build although I have stripped down the gearbox and reassembled it with the gears in the right places now it works:D

Stu

Re: 2A6 - in bits!
 

Cool... Sounds like you are on the right track!

Well done,
AP

Re: 2A6 - in bits!
 

You can get any or all of the parts you need from the AAF in Danvile VA.
http://www.aaftankmuseum.com/

Re: 2A6 - in bits!
 

Awesome, thanks Gregg, nearly ready to place an order, nice to be able to get all that I need from one place, although i'm sure to have forgotten something!

Stu

Re: 2A6 - in bits!
 

Now that looks like my type of mess my first KH came something like that had more fun building than I did playing but at least you got the instuction book I only got the first three pages.

Re: 2A6 - in bits!
 

Glad to see you makeing progress and super happy to hear you are satisfied with our deal.

Bummer on the gear boxs being assembled wrong, I never did anything with the kit, so the previous owner must have goofed them up.

Looking forward to seeing this come together and rolling.

Re: 2A6 - in bits!
 

Hey Dev, the gearbox was the easy part, just followed the instructions in the book;) The real bummer is trying to figure out whats missing:confused:

But I'm getting there, just need to save up now so I can order the parts all in one go, its suprising how soon it adds up:eek: Still happy with the deal though, have you played with that mfu yet?

Re: 2A6 - in bits!
 

Yeah, that has to be a challenge sorting threw all that to figure out what is missing.

I have not had a chance to mess with the MFU yet. I will this weekend as I actually traded it to a buddy for an older version with no esc. We will be hooking yours up to his rig on Saturday when he brings his radio over.