transmission and rds 8000
 

anybody using the swicth on the airtronics rds 8000 to swicth between trany gears if so how do i go about doing so

Re: transmission and rds 8000
 

I have done this, I assume you are referring to the 3 position switch? Its pretty easy you have to set it up with your end point settings.

Re: transmission and rds 8000
 

hi brian thats exactly what im talking about i have done it beefore but it messed up my mfu functions can you tell me how to set up; endpoints

Re: transmission and rds 8000
 

I always set the mfu up as the instructions tell you. Then I just my servo leads to get to what I want then I set the switch up. You need to have the endpoint function up on your display then put the switch in each position as you adjust your points.

Re: transmission and rds 8000
 

Hey man maybe this will help you out setting up your rds 8000

http://www.rctruckandconstruction.co...hlight=rds8000

Re: transmission and rds 8000
 

I can heartily reccoment the rds800 gear, I have two and use the 3 position switch for the transmission on both. I never had to adjust anything on the endpoints on mine or the other one I have set up in the past.