RC Truck and Construction - burder road roller

Page 1 of 2

Show 40 post(s) from this thread on one page

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)

- Construction Equipment (https://www.rctruckandconstruction.com/forumdisplay.php?f=6)

- - burder road roller (https://www.rctruckandconstruction.com/showthread.php?t=7055)

lee.means

05-29-2013 11:12 PM

burder road roller

5 Attachment(s)

here is my little cat roller

lee.means

05-29-2013 11:14 PM

Re: burder road roller

5 Attachment(s)

sorry for the back pic my phone sucks

grumpygrady

05-30-2013 12:08 PM

Re: burder road roller

nice conversation please show more

lee.means

05-30-2013 12:24 PM

Re: burder road roller

what would like to see

louie r/c nut

05-30-2013 01:35 PM

Re: burder road roller

Very nice .

FlyingBeagle

05-31-2013 10:03 AM

Re: burder road roller

Would love to see more detail on how it is driven.

justin

05-31-2013 06:04 PM

Re: burder road roller

Any videos of it

Rd/Rz

05-31-2013 09:12 PM

Re: burder road roller

I am just finishing one of these conversions, managed to keep all the electronics in the front section . Never took the rear apart . Used 2 micro servos converted to 360 ,spektrum micro Rx ,4 cell Nimh from a receiver pak .

Stuff

05-31-2013 10:28 PM

Re: burder road roller

nice!

lee.means

05-31-2013 11:37 PM

Re: burder road roller

Quote:

Originally Posted by Rd/Rz (Post 88414)

im just about all done i am using 3 hxt 900 micro servos. 2 vibrates from a old xbox360 and iv add about 2.0 lbs to the drums and im up to 6v

MoRockN

06-01-2013 03:46 PM

Re: burder road roller

Very nice. I did a roller like this also but I wanted a drum mounted motor just like the real ones. I'll see if I can find any pictures.

Kaf343

06-01-2013 04:24 PM

Re: burder road roller

Very cool roller

grumpygrady

06-02-2013 08:27 AM

Re: burder road roller

Quote:

Originally Posted by MoRockN (Post 88485)

Very nice. I did a roller like this also but I wanted a drum mounted motor just like the real ones. I'll see if I can find any pictures.

is there a build thread?

MoRockN

06-03-2013 02:38 PM

Re: burder road roller

Quote:

Originally Posted by grumpygrady (Post 88563)

is there a build thread?

There isn't one as I did it before I joined this forum. But I found some pictures and I will post a build thread:D

lee.means

06-03-2013 02:40 PM

Re: burder road roller

you can post them on here if u want

5inchman

06-10-2013 06:27 AM

Re: burder road roller

Quote:

Originally Posted by MoRockN (Post 88671)

There isn't one as I did it before I joined this forum. But I found some pictures and I will post a build thread:D

Hi, I've had one of these rollers on the bench for a year trying to work out how to fit the motors in the rolls. I would appreciate any help and pictures you could provide.

Cheers
5inch

lee.means

06-10-2013 01:06 PM

Re: burder road roller

2 Attachment(s)

its super ez take off the roller you will need to make a cut buy the eagle so a round servo horn can go throw. (oh and you will need a round servo horn with a o-ring on it) i used o-ring w/hot glue and hot glue and a zip tie to hold it in the right place

lee.means

06-10-2013 01:09 PM

Re: burder road roller

sorry my camera sucks. hope it helps

lee.means

06-10-2013 06:29 PM

Re: burder road roller

2 Attachment(s)

Quote:

Originally Posted by lee.means (Post 89061)

sorry my camera sucks. hope it helps

see if this helps

5inchman

06-21-2013 06:10 AM

Re: burder road roller

Quote:

Originally Posted by lee.means (Post 89080)

see if this helps

That is great stuff lee, i'd like to see how others have fitted motors in the drums.
You even got it to vibrate?

Regards

5inch

All times are GMT -4. The time now is 01:26 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page