Quote:
Originally Posted by frizzen
That's pretty cool than you can do that flat of a drivetrain.
Is the steering tierod too short, or is it just the picture angle?
|
Hi Frizzen, no it's not too short, it's just not adjusted yet, I also straightened the tie rod out and removed the front shocks. I found, after deciding to build a Crackerbox and got some critical dimensions online that I had to move the axle forward.
Quote:
Originally Posted by Mikem
Hi Kent would you share what motor you have in your truck ? Thanks .
|
Hi Mikem, I get them from Servo City, the one in the chassis is 437 RPM. I have one in my dump truck connected to the screw drive, it's 313 RPM and a 165 RPM on the shelf, I ran it in my dump for a while but thought it was too slow, all kinds of power though. I have to give credit to Reg (RPC57) for the motors, I found them in one of his threads and he told me where to find them.
https://www.servocity.com/motors-act...ry-gear-motors