Quote:
Originally Posted by Berman
This looks like a nice unit. Not as expensive as some of the other tray style units like the Servonaut zw04 etc.
I bought a DX6 (black version) and it refuses to work with my MFU's (works fine with my Beier though) so this might be a good alternative and future proof me for other units and some small construction equipment etc...
|
For sure, the Taranis works well with both the MFU and Beier modules and with the possibilty of 32 channels your more than future proofed.
Quote:
Originally Posted by lickedi
Nice Job, om working on the same remote and could need some help with how to connect the 4axis joysticks to the remote ��
|
For the X & Y axis I cut the wires from the original joysticks and soldered to the new ones.
For the Z axis and pushbuttons you will need some 3 pin JST connectors, connect these to the spare sockets on the main board and configure the outputs on the radio, then calibrate the sticks/swithes and voila!
If you need more help then let me know.