Re: PFB Tri-Axle King Hauler
I've put a fair amount of stress on these ring and pinions before. I know they'll fail eventually though.
Specs on pullers:
You can't find a more powerful brushed motor in this class. You get insane wheelspeed, more torque than any 540 motor, and the finest slow speed control. All in one motor. 7 slot armature allows for better throttle resolution with a high motor speed.
Recommended lipo battery-
6t- 2s only. 40a continuous
7t- 2 to 3s (3s may result in overheating). 45a continous 11.1v use, 35a continuous 7.4v use
10t- 2 to 3s. 40 amps continuous 11.1v use, 30 amps continuous for 7.4v.
14t- 3 to 6s. 35a continuous 22.2v use, 25a continuous 3s use
Slightly longer than a standard 540 motor. Uses standard 1/8" pinions, and 25mm motor mount spacing- bolts up like a normal 540 motor. **Some stock uses 4-40 mounting screws that are included**
Super Strong cobalt magnets
7 slot armature
6.9 ounces, 200g
2.5" long, 1.35" diameter
5-10 volts
160*F max
6t- TBD
7t - 2800 rpm/volt
10t- 1800 rpm/volt
14t- TBD
|