Quote:
Originally Posted by rcguyfarms
I tested with 12v direct to the motor. I might try 6 cell battery. I might ask are u running a second lower voltage battery or are using the esc to lower the voltage? my down pump in the excavator that is tether to a 12v dc source. I have no need to run an esc on the pump.
|
I am using the stock 12v nmih pack and a tamiya esc to limit the voltage to the pump. I have it setup so that the maximum voltage out of the esc is about 8.3 volts (tricked the esc programing into thinking full throttle isn't 100%) that way the pump is always running at the best rpm when any of the hydraulic sticks are at full throw.