Thread: RC Benchy
View Single Post
  #38  
Old 10-10-2022, 03:16 PM
ddmckee54 ddmckee54 is offline
Green Horn
 
Join Date: Dec 2011
Posts: 227
ddmckee54 is on a distinguished road
Default Re: RC Benchy

Frizzen:

My multi-color paint job for the wheel is going to look OK, and so far without masking. I started out with a 1/0 brush, then went to a 3/0, and finally the 5/0 seemed to work the best for me. I'm going with a brass center, wooden spokes, and a gloss black outer ring. I just need to figure out a better way to hold the part while painting it.

I tried a Model Colors leather for the spokes, but they are a little too dark. I'll have to see if I can lighten them up a little with some Model Color flat earth. I think I'll try the "glazing" technique that SpruesNBrews uses for his 1:35 scale figure painting, applying a little bit of color in several thin coats. If the color isn't exactly consistent, so what - neither is wood.

Don
Reply With Quote