Looks like the ink floated to the top of the clear coat, so most of it could be removed with light sanding. The red paint is deeper, so I might have to live with that small flaw.
Mirror mounted reverse lights (?)
Warm white 3528 LED glued to transparent plastic inserted into a 6.3mm outside width square styrene tube. Inside filled with more glue and a 2mm thick piece of styrene glued to the back. Mounted to the mirror with a piece of a paper clip. The wires are harvested from a broken HDMI cable. They're very thin, feels like about half the size of the 28awg wire I've used for the other lights, and I'm not sure if I'll be able to crimp connectors to them.
