View Single Post
  #8  
Old 03-23-2021, 02:46 PM
ddmckee54 ddmckee54 is offline
Green Horn
 
Join Date: Dec 2011
Posts: 228
ddmckee54 is on a distinguished road
Default Re: 3D Filament color match to Bruder

I got the samples from Coexllc, two different yellows and two different reds. The yellows aren't even close, but one of the reds is a fair match to the Bruder red.

I took a couple of pictures of each comparison, one with flash, and one without flash. This is the link to those pictures.
https://photos.google.com/share/AF1Q...dtbHFISVBmRWdn

The first image is is the yellow samples laying on top of the Bruder yellow without flash. The sample on the left is the Taxicab yellow, the sample on the right is the Construction yellow.

The second image is the same setup, only with flash.

The third image is the red samples laying on top of the Bruder red without flash. The sample on the left is the Salsa red, the sample on the right is the Scarlet red.

The forth image is the same setup only with flash.


This is the first time I've tried to post photos, so I'm not sure I'm doing this right.
Don

Last edited by ddmckee54; 03-29-2021 at 02:41 PM. Reason: Image link boo-boo - fixed it sort of.
Reply With Quote