Thoughts

[Benni]

I've been drawing in Fusion 360 lately and would love to get some feedback, especially from those who have some experience with 3d printing.
I was Planing on printing the knuckles and case, the rest is a mix of commercially available parts, later headache, and magic.

[IMG][/IMG]

I know, I know, it's not for a semi or a construction machine, that will come later.
Even though I've been drawn towards trucks and construction machines I still would like to have a "normal" car/SUV and because I'm weird I want to have everything the same scale, My TF2 is too big and build semi or excavator in 1/10th scale is, well, too much.

The car I'm planing on building using this axle is series 1 (1991-1994) Ford Explorer simply because I used to own 2, and no I'm not even going to try making TTB like they came with original (lift them a little bit and you'll ruin the steering geometry)
This will be more like I always wanted my car, modded after my head.

The STI File;
https://drive.google.com/open?id=16U...FjNokayNzUiCrA

Feel free to download and take a look, like I said, I would love some feedback.