Volvo A40F

[RCP57]

Hey that diff in the last picture is what I am after! Well I need two I guess...

The suspension parts are looking great Ari! Did you ever get the TIG welding figured out?

[Hemi1966]

Originally Posted by RCP57

Hey that diff in the last picture is what I am after! Well I need two I guess...

The suspension parts are looking great Ari! Did you ever get the TIG welding figured out?

I'm still struggling when I try to weld thin plate to some thicker part, I can't get the thicker part hot enough before thin one melts away

[doodlebug]

Originally Posted by Hemi1966

I'm still struggling when I try to weld thin plate to some thicker part, I can't get the thicker part hot enough before thin one melts away

Have you considered something like muggyweld for the Un tig-able stuff???
http://www.muggyweld.com/
Cheers, Neil.

[Hemi1966]

I started to make the frame

[Hemi1966]

I test fitted the bogie to the frame. I don't have the new middle axle yet to see if the drive shaft have enough room
I think I start to make the a-frames front end attachment next. I going to use a ball joint there so that the bogie and axles can move freely.