![]() |
|
#11
|
||||
|
||||
|
I wanted to thank Joe and Ralph for coming forward and sharing their weak moments in the RC world of construction.
![]() ![]() ![]() As in the real world, S&M construction is going through a breakdown, low production phase ![]() ![]() The HK hoe is down, I was done for the day and as I picked it up to bring back to the house I noticed the swing motor moved on its mount. Sure enough, motor mount plate screws coming loose. Figured it was time to do a circle check and see what else needs attention. Motor/pump mounting plate coming loose again ![]() ..... Time for some locktite.New dozer down, Blew the right final drive after testing with a 7.4 lipo. Haven't even opened it up yet. ![]() 574 loader down, Snapped the left side loader frame arm at the pin pivot. ![]() Dump truck is up! . Hasn't missed a beat since hitting the backyard, besides the odd tire blow out.![]() ![]() So with production at an all time low, I figured great time to start setting up a loading dock area. I've been so caught up in the pit work haven't done a thing for the trucks and trailers! ![]() Thanks to the non permanent shingle road, new plan is a " super dock" . 3 full size pallets, 4 stalls and a cargo area A few pics of , what I call, " land reclamation" for the new super dock area ![]() Going to remove the road near the bush and use entire area as a yard and dock. ![]() ![]() ![]() You can't really tell in the pics how much space I gained... Here's all the brush I removed. ![]() Thanks for looking. ![]()
|
| Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
| Thread Tools | |
| Display Modes | |
|
|