VolVo EC300

[der82c]

the full assembly drawing
no much of the detail, as he told me that he will do the modification on the detailing later days. not a fussy guy to work with.

[IMG][/IMG]
[IMG][/IMG]

[IMG][/IMG]
[IMG][/IMG]

[der82c]

few weeks pass by, designing, dimensioning, final changes, altering the drawing,
finally the print out for fabrication. the production will need the help from my colleague, the laser cutting operator, bender, welder, finishing and coating.

[IMG][/IMG]

[der82c]

from the production

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

stainless steel bucket as to prevent rust when the paint peeling off by time.
the welding work are not as perfect as i expecting. the junior welder use the wrong size of tungsten lead for fine welding. was hoping it turn out fine after powder coat

[IMG][/IMG]

[der82c]

after powder coating,
well,the bucket turn out quit "ok" for me.

[IMG][/IMG]
[IMG][/IMG]

initial assembly of the body parts without hydraulic and electronic system.
no quit have it alive and sense of its spirit of a volvo yet as the exterior still smooth plain.
its just a moderate built, this model is not much compare to other great builders around. it least serve the objective

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[IMG][/IMG]
[IMG][/IMG]

[Joe25]

great work

[der82c]

it was 2 hour drive to delivered it to his home.
i was surprised once i reach, he had those hydraulic ready pre-assembly, awaiting the structure to install on it, he really serious abt this stuff.
since it been 2 hour journey, i stay for awhile to help him with the installation. end up been there for whole day time.

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG]

the serious guy...

[/IMG]
[IMG][/IMG]

[der82c]

some video....



http://vid38.photobucket.com/albums/...pscxh8st7h.mp4