Wanco vertical mast arrow board

[frizzen]

Thank you wombii, it took a while to figure out how i could reduce it down to this design. I was hoping it might be less intimidating for a hobbiest following along at home. I didn't want to design and etch boards, or learn programming, or any thing like that.

You're being far too generous skeeter, i'm sure you'd get it. Although for simpler on the flasher side i probably should have just sent a fixed flasher, but i was low on parts and really wanted to see if the variable resistor would work for adjustment. Plus i knew you run videos, so i didn't want you stuck with it looking funky if i sent something that happened to be a freq that didn't play nicely with your frame rates

I really do need to just grab one of these and draw up the schematic already.