![]() |
|
|||||||
| Sound Systems tech This section is dedicated to the sound systems for our models. Tamiya MFU, Servonaut, etc. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
http://www.tamiyausa.com/pdf/manuals/56511ml.pdf
Found a manual. I should have known! However, it doesn't tell me what voltage it is using to run the LED lights. Do the LEDs have any resistors in series with them, or do the LEDs just plug direct into a terminal?
__________________
Nathan |
|
#2
|
||||
|
||||
|
There are no external resistors. At the same time, the currant from the clearance light plug would be higher than the currant required for a single LED.
Test different plugs on the MFU to see what the voltage is. Keep in mind polarity. Joe
__________________
"Experience is what you get right after you needed it." |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|