|
Mechanical tech This is for the mechanical parts of a model. Gear reductions, Axles, Transmissions, General drive line |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Re: Driven front axle options?
Well here is my experience with a disconnect for the front axle. I have a dump truck with a TLT for a front axle and an RC4WD 3 speed. The 3 speed is only rear output in 2nd and 3rd gear. In first gear it engages the front axle. Steering with a load sucks in 2nd and 3rd with having to push the front axle around turning the diff and drive shaft (this is where the disconnect in the axle would come in handy like Small Haul mentioned). So I find myself driving around in first most of the time. From then on after building that truck I just made them full time all-wheel drive.
__________________
AKA "00" Biddle RIP FreddyGearDrive 2-12-59/12-19-11 |
#2
|
||||
|
||||
Re: Driven front axle options?
Quote:
I guess a compromise would be a disconnect trans or transfer case and a lockable front axle. Does anyone have first hand experience with the lockable Lesu front axle? Is it durable and function well?
__________________
Scott "No load is too Small" |
#3
|
||||
|
||||
Re: Driven front axle options?
Quote:
__________________
AKA "00" Biddle RIP FreddyGearDrive 2-12-59/12-19-11 |
#4
|
||||
|
||||
Re: Driven front axle options?
Great info Travis, Thank You.
__________________
Scott "No load is too Small" |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|