53' custom box trailer build

[Just_Build_It]

That would've been great to have some better pictures.

I thought it moved with a single unit up and down. Using hydro's would be the way to go but I was trying to keep it simple and on the less expensive side. If you could get some pictures I might be willing to change up the rear end to make it the proper way.

Since I've started this build I probably have built it and tore it down so many times that I can't remember. I'm going to change the chassis from wood to aluminum once I can get more materials.

[Hostile]

Ok i was able to get some pics for you today. Hope they help.

[Just_Build_It]

Thank you for those pics, they are exactly what I needed! I think I can do something to make this work.

[wolfws6]

I'm super interested on how you'll get this to work. I'got lazy on mine and never tried to make like the real trailers. Keep up the good work!!

[Just_Build_It]

A lot of R&D for sure. It'll take some time and I'll eventually get it operating. I have decided to go with hydraulics so that is going to take a little longer to acquire a full hydro setup.

[Just_Build_It]

Not the cleanest looking chassis but its the best I can do with only screws and nuts. Still way more to go.


I know what you are thinking... That chassis looks weak! Rest assured that it will be reinforced.

[Just_Build_It]

Got the axles in place. They are a little off center looking at the picture.

[Just_Build_It]

Added braces and straightened up. I still have to bolt down the carrier deck to the chassis.

[Just_Build_It]

I started drawing a concept of the lifting mechanism via dual screw drives.

Here is the rough sketch of the screw drive system I'm envisioning. As always some input from anyone is always appreciated.

[tippa]

pm sent just build it might be able to help with your lens problem

[Hostile]

Photobucket is an issue atm as pics wont show. Im switching to imageshack so cant see pics beother

[Just_Build_It]

Ugh, I've been using photo bucket for at least 15 years and now they want my money. I'm going to check out imageshack as I've never used it before.

[Just_Build_It]

A little update of what I've been up to. I cut out the tool/equipment/lounging bay rear door frame then cut out a ceiling and drilled holes for some interior lighting. I finished up getting the floor situated and painted. Next I moved onto the first tool box/storage unit. There's still a lot to be done in that area.

[Just_Build_It]

I'm trying to work on things other than the lift gate until I can get some hydro cylinders, so at this juncture in the build I'm trying to get the interior all dressed up. Once I finish the cabinets and such I'm going to move onto getting all the lights wired up. The walls are going to be last for obvious reasons.

This what I did today.

[Just_Build_It]

I got some of the interior finished yesterday and today. I finished wiring the ceiling lights and added a light for the cabinet towards the front. The construction isn't finished with a professionals touch but it looks decent enough.

[Just_Build_It]

Kind of looks like a party bus or discotek now. The blue doesn't photograph very well with my phone.


From the side door looking in

[Just_Build_It]

I've been working on the lift-gate. I added five lights and hooks with chain.

[Hostile]

Looking great there mate!

[Just_Build_It]

Thank you! This project is really a complicated one and I'll get some updated pictures up soon of where I'm at.

[SpeedyPetey]

Thats going to be soooo cool when completed!