2 IH 433 payscrapers (ps433-2 moves)

[td9clyde]

We need some pics!!!!!!!!!!!!!!!! please lol

[ihbuilder]

Originally Posted by td9clyde

We need some pics!!!!!!!!!!!!!!!! please lol

calm down Henry I just got the 18 rollers off the lathe this morn by 7 now I'm making front idlers still have to order the bushings or make them . this is the longest part of the build ( track assm. )

[td9clyde]

lol i know what you mean the tracks i have to make all the pads and weld the links and grouser bars on yet lol and make the idlers and pick up some sprockets

[ihbuilder]

just testing my YT upload , I have this vid posted from PB

http://www.youtube.com/watch?v=PUifLGLOt10

LMK if it works

IHSteve

[doodlebug]

Hey Steve does this tranny have enough ratio for your scraper's? It's almost a micro Roadranger 8LL LOL!



http://store.rc4wd.com/3-Speed-Full-...ack_p_830.html

Later, Neil#2 aka doodlebug.

[ihbuilder]

Guys , If all goes well I may have a supprise next week end I'm slowly getting out of this lil depressed state and pondered on how to get the pan to work with what I got well almost I just got to come up with at least 2 more esc,s and a servo arm . It's killing me not to see this bugger running .

IHSteve

[ihbuilder]

here's some pics . touching up the paint a little and mounting a 1/4 size sevo for steering . I made a screw drive for the bowl lift and will do the same for the ejector . I have a 3racing winch I'm thinking of using for the apron .



made the a/c top while I was making truck a/c and tlt hubs since it was the same mtrl.



I'm going to stuff more pipe wrap ins. in the tires and see if that helps , (it should )

IHSteve

[JAMMER]

Looking good Steve are you going to bring a pan to York? I willsee you thers next week.Ed

[ihbuilder]

Originally Posted by JAMMER

Looking good Steve are you going to bring a pan to York? I willsee you thers next week.Ed

It's coming , I'm trying to at least get it so I can drive it around and maybe operate just the bowl by hand at the very least .

IHSteve

[D8R]

Nice model, more is better, will look good running togheter. Where will battery be, look realy tight under the hoods? Have had my thought of converting the 463 into a DW20 combo but couldn´t figure out where all shoud fit, maybee possible with electric drive.
Looking forward to photos from the meet.
Dan

[SmallHaul]

looks good Steve.

What 1/4 scale servo are you using? If it is a hitec digital servo, I have a hitec digital servo programmer and if you program the servo to 180degrees of rotation you can attach the steering linkage closer to the center of the servo and get almost twice the power out of it and still have good throw.

[sneaky-pete]

This thing is a beast!
I need to use this in my wife's garden this spring...lol

[ihbuilder]

thanks D8 I'll prob. eventually enclose the cab and put 1 batt there and stuff the rear 1 in the back . it's supposed to have 2 receivers and 2 esc's so I do not have to run wires through the bowl . but for now I will till I get everything I need .

Originally Posted by SmallHaul

looks good Steve.

What 1/4 scale servo are you using? If it is a hitec digital servo, I have a hitec digital servo programmer and if you program the servo to 180degrees of rotation you can attach the steering linkage closer to the center of the servo and get almost twice the power out of it and still have good throw.

Scott , It's a hpi sl? 10mg . I got the arm coming I may get the funds I need for the 2 esc to be able to use it I'm just hopping to get them in time when I order them .

Originally Posted by sneaky-pete

This thing is a beast!
I need to use this in my wife's garden this spring...lol

LOL


IHSteve

[Izzy]

Scott - that's a great idea - didn't know that was even possible .....must store this one away for future problems.....

[ihbuilder]

well looks like I will be running this thing UNLESS the esc's do not come in time . I got the bowl lifting and the ejector drive unit just about done just got another bar to run on the lathe for wheels then I can finnish the ejector then just the apron lift :still thinking : I'm kinda sacraficing some scale look for now till I can start to get hydro components made or bought (not sure yet )

IHSteve

[dirtpusher9]

Steve, I think you need to quit the truck parts and build you equipment so we can see it running. It looks good, but you are stringing it out to long on us. lol

[ihbuilder]

Originally Posted by dirtpusher9

Steve, I think you need to quit the truck parts and build you equipment so we can see it running. It looks good, but you are stringing it out to long on us. lol

LOL , where you been long time no see

[td9clyde]

scraper is lookin goooood i was thinkin about makin screw drives for mine but i think i will just wait and make it hydralic just gonna cost me an arm and a leg for the valves wish i could get ambitous to work on anything

[ihbuilder]

Know what your saying Henry well as some of you know I didn't make cabin fever but 2 good things came out of not making the show those pics will come later well after I pick the 2nd item up tomorrow . Anyway , while loading a vid to put in my truck listing I finally uploaded the bowl lift vid .

http://www.youtube.com/watch?v=HfsNml2cXbA

not as smooth as I like but it will do till I get more time and parts designed and made for it

thanks for looking
IHSteve

[SmallHaul]

Nice power Steve!

That machine is sooo heavy it should shave earth easily.