|
Military Tech. Tips/Tricks and info on all Military in here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
3D printed Cushman 1/16
|
#2
|
|||
|
|||
Re: 3D printed Cushman 1/16
That is crazy....you are a real craftsman...
|
#3
|
|||
|
|||
Re: 3D printed Cushman 1/16
Thanks my friend...
I thought it turned out pretty good |
#4
|
|||
|
|||
Re: 3D printed Cushman 1/16
Looks GOOD, now if you could only make it RC...
|
#5
|
||||
|
||||
Re: 3D printed Cushman 1/16
Sharp little scooter! Really nice job on the weathering.
Mmmm, C-rations. Cool, let's get this out onto a tray. Nice. If someone were FAR too crazy, some ammo cans mounted on the sides could possibly hide some rc components
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time... |
#6
|
|||
|
|||
Re: 3D printed Cushman 1/16
It would be great if you had the opportunity to make it into an rc unit. But my skills are not there at all.
And thank you very much for the kind words |
#7
|
|||
|
|||
Re: 3D printed Cushman 1/16
I wonder if the guts from one of those 1/76 RC cars could be adapted to work? Probably be a LOT easier to do a motorcycle with a sidecar though. Then you wouldn't have a balance problem to deal with. Anybody out there crazy enough to try it?
Frizzen, if you mounted the ammo cans low enough you might even be able to hide a pair of "training wheels" in them. (No balance problem.) Or maybe some big and really TALL saddle bags? Even so, as narrow as the wheel track would be the thing would probably want to lay itself over if you looked at it wrong. Last edited by ddmckee54; 05-03-2023 at 02:21 PM. |
#8
|
|||
|
|||
Re: 3D printed Cushman 1/16
There are lots of good ideas. Who has the skills and courage to try to do it?
|
#9
|
|||
|
|||
Re: 3D printed Cushman 1/16
LOL that's what I was thinking ReneDK... these guys might try it but not sure I would tackle it
|
#10
|
|||
|
|||
Re: 3D printed Cushman 1/16
|
#11
|
||||
|
||||
Re: 3D printed Cushman 1/16
Looks like those ww2 Cushmans could pull a small trailer (to keep it upright + carry batt rx esc) or there was a non-airdrop 3 wheel trike version.
Probably would need TTTT electronics that are used to make 1/87 scale rc trucks. DasMikro would be the cheap option without learning german I don't know of any RC Armor groups around here, and I already made a sidecar bike that's too small (1/18). Don't think i have enough to prove to want to do one... i'm just putting bad ideas out there.
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time... |
#12
|
|||
|
|||
Re: 3D printed Cushman 1/16
No bad ideas here, I wish I had the skills for such a project.
Got a link or pics of that bike I'd like to see?? |
#13
|
||||
|
||||
Re: 3D printed Cushman 1/16
Sure Rene,
1/18 maisto Harley-Davidson Sidecar https://www.rctruckandconstruction.c...ad.php?t=13894 First post of mine links to a build which i "Liberated" a bunch of ideas from, 1/16 Polistil BMW R75.
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time... |
#14
|
|||
|
|||
Re: 3D printed Cushman 1/16
Quote:
Who just had those skills. |
#15
|
||||
|
||||
Re: 3D printed Cushman 1/16
Pretty sure instead of Craftsmanship, mine was just mixing some boredom with trying to make a 'dust collector' model into an extremely light-duty toy.
(If it failed i was going to break it down and strap its parts to a pallet for my forklift to play with) I think your Sherman would look pretty cool with a harley Messenger Dispatch bike...
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time... |
#16
|
|||
|
|||
Re: 3D printed Cushman 1/16
Sometimes good things just come out of being bored. Agree that a WLA would look good riding next to the sherman.
I think my next project will be a Torro halftrack |
#17
|
||||
|
||||
Re: 3D printed Cushman 1/16
I was looking around for some accessories for a project and ran across a bunch of printable millitary bodies designed for WPL / JJRC / MN axles and parts. Add more diversity to the battlefields layouts
https://cults3d.com/en/search?q=Wpl Archer B1 Centauro Ba-3/6 scout Ba-20 armored car Btr-4 Brdm 2 Esk Mungo Dodge wc-51 Gtk boxer Marder 1 apc Stryker Tank carriers Trailers Vw ilts Zil e-167 Plus a bunch of Drivers, interiors, wheels, fuel cans, toolboxes, cargo, guns, rocket launchers...
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time... |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|