3 speeds

woodhog · #1 11-18-2010, 08:08 PM

what are most new builds usin . im plannin on building a ground up truck what should i use r2 or somin else

Espeefan · #2 11-19-2010, 03:37 PM

There are a lot more options these days then in the past, if you are okay with less then 3 gears. The best way to decide what will work the best is to consider the type of truck you want to build, and then consider what you want to spend. If you are tight on space, an R2 would work well. Axial transmissions from the rock crawler trucks work nice too. Or search for a compact planetary gearbox, or gearmotor. There are also the Tamiya 3 speeds, Wedico 3 speeds, Scale Art 3 speeds, and some have used the Traxxas E-Maxx transmissions as well. Just about any of these would work well and be pretty much bullet proof.

aseejr · #3 11-19-2010, 04:49 PM

I just ordered one of these to try out:

http://store.rc4wd.com/3-Speed-Full-...ack_p_830.html

They also have a few other interesting pieces.

woodhog · #4 11-19-2010, 06:21 PM

thanks guys i have 4 crawlers might need a donation from one thanks for info

calm n sedated · #5 11-20-2010, 07:40 PM

aseejr,

my advice would be....get one strong servo (200 in oz or stronger), make sure its digital cause that rc4wd 3 speed tranny is real hard to shift.

fhhhstix · #6 11-20-2010, 07:58 PM

Quote:

Originally Posted by calm n sedated

aseejr,

my advice would be....get one strong servo (200 in oz or stronger), make sure its digital cause that rc4wd 3 speed tranny is real hard to shift.

I have one of those trans in my black dump truck and he is right they are a pain to shift I am using a hitec 645MG to shift it. If it wasn't for getting it in a trade I wouldn't have it. A tamiya three speed with an AXIAL trans connected to it for a transfer case is cheaper and just as good in my opinion.

Travis

#7 11-21-2010, 08:36 AM

i make the standard tractor 3 speed into a 4x4 tranny

i put full bearings in them too

http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT

Bigrigger · #8 11-21-2010, 10:46 AM

Joe, I'm curious. Does that mean all you have to do besides get your case is put in a drive axle and shafts? It does 6x6 right?

Thanks

JAMMER · #9 11-21-2010, 11:21 AM

I have one of these it a 3 speed . Ed http://www.der-getriebedoktor.de/shop2/art31529.jpg

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)