|
Mechanical tech This is for the mechanical parts of a model. Gear reductions, Axles, Transmissions, General drive line |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Re: simple device to build cheap and exactly leave springs
I really like what you have done. What thickness of bronze are you using, and what material are you using to hold the springs together?
Rob |
#2
|
||||
|
||||
Re: simple device to build cheap and exactly leave springs
Quote:
Hello Rob, the thickness is 0,5mm. The parts for hold the springs together is in every windshield wiper under the rubber. Naturally i have used an old. The parts a pressed with aid of a vise.
__________________
Best Regards Wolfgang To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|