Newbie from UK

[Digger_Bear]

Sorry I’ve tried edited my post but cannot see how, I did only mention it to give history of me but I see it could have been read as advertising.

The Magom excavator I bought is 1/14 scale, and the hydraulics in this use a high torque low speed brushless motor and HLP15 oil. I think from memory the pump details which it came with said pump works up to 35bar but the pressure bypass is set at 18bar. As it’s all new to me I don’t know if that is good or bad.

I’ve now started a post in the construction section, which has various pictures of unpacking.

http://"http://www.rctruckandconstru...09#post129609"

[Lil Giants]

Originally Posted by Digger_Bear

Sorry I’ve tried edited my post but cannot see how, I did only mention it to give history of me but I see it could have been read as advertising.

That's ok, I just pointing it out to you incase you overlooked during registration, what you've written can remain, but if you wish to make prices for purchases public on the forum, then a Vendor forum of your own you must have.

The edit post option for OP remains intact for only 20 minutes, after that a mod, super mod or admin will have to edit for you at your request... we had to take this measure yrs ago b/c of other troubles in other areas of the forum. Change a title, edit a link, whatever, we'll fix it for you. Hit the "Contact US" button at the bottom of Index page.

Your specs on your pump sound like plenty, few hyd models I have run greater pressure than that. Depends on the size of cyls & weight of model how much pressure is necessary.