RC Truck and Construction  

Go Back   RC Truck and Construction > RC Tech section. > Truck Building Tech

Truck Building Tech Covers mechanical and electrical components for truck modeling


Reply
 
Thread Tools Display Modes
  #1  
Old 09-06-2019, 11:04 AM
jgmick jgmick is offline
Newbie
 
Join Date: May 2015
Posts: 18
jgmick is on a distinguished road
Default How to blacken brass, advice needed.

I want to make some brass parts black. I bought some commercial stuff that is supposed to do that. Tried it out, yep, it turns the brass parts really black, BUT... There is about zero durability in the coating. Rubbing it even slightly takes off nearly all of the black color. Disappointing.

Am I doing something wrong with surface prep? I tumbled the parts in a deburring tumbler, then washed them down with solvent before soaking in the solution. Do I need to do something like sandblasting them before treatment? Something else?

Are there better and lesser brands of blackening solution out there? If so, what's a good brand?

Is there an electrolytic process like anodizing for aluminum that works on brass?

Got to get something better than what I have now. Open to suggestions.
Reply With Quote
  #2  
Old 09-07-2019, 07:58 AM
kaptain Jack's Avatar
kaptain Jack kaptain Jack is offline
Journeyman
 
Join Date: Jan 2012
Location: Toronto Canada
Posts: 613
kaptain Jack is on a distinguished road
Default Re: How to blacken brass, advice needed.

Acid dipping will do the job, although I can't remember which one: hydrochloric or sulphuric. One will clean, the other tarnish. lightly sand first to remove the patina.
Reply With Quote
  #3  
Old 09-10-2019, 09:24 AM
jgmick jgmick is offline
Newbie
 
Join Date: May 2015
Posts: 18
jgmick is on a distinguished road
Default Re: How to blacken brass, advice needed.

Thanks for the info but hydrochloric acid is kind of a non-starter. I have worked with it before and didn't ever like the experience. All kinds of hazards. Not in my job jar if I can ever avoid it. Sulphuric I can handle. (Battery acid.)

Also I am kind of looking for really black, not just tarnished. (I can get tarnished just by leaving it out in the weather for a couple of weeks.)

The "lightly sand" is kind of an interesting idea. I can get that with sandblasting. May give it a try and see if that makes things better.
Reply With Quote
  #4  
Old 09-11-2019, 01:56 AM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 1,991
frizzen is on a distinguished road
Default Re: How to blacken brass, advice needed.

Birchwood-casey makes a product 'brass black' that i'd probably try first.
https://www.youtube.com/watch?v=PQqRKX2dWWI

There are some antiquing and patina fluids out there that are more hobby level

Or you there are some industrial systems out there if you had the setup to make it work and weren't just doing one-offs. Talk to machine shops if you want that?
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:57 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.