RC Truck and Construction  

Go Back   RC Truck and Construction > RC Tech section. > Mechanical tech

Mechanical tech This is for the mechanical parts of a model. Gear reductions, Axles, Transmissions, General drive line


Reply
 
Thread Tools Display Modes
  #1  
Old 04-01-2022, 10:12 AM
sparkycuda's Avatar
sparkycuda sparkycuda is offline
Journeyman
 
Join Date: Aug 2010
Location: English, IN
Posts: 697
sparkycuda is on a distinguished road
Default 1/16 Axle with Differential needed

Current project needs a rear axle with differential. Tamiya/Lesu diffs are physically too large. The 1/18 axles I have seen don't have diffs.
Suggestions requested.

Thanks!
__________________
Big iron is awesome!
Reply With Quote
  #2  
Old 04-01-2022, 01:33 PM
trilliwilli's Avatar
trilliwilli trilliwilli is offline
Wannabe
 
Join Date: Jul 2011
Location: Netherlands
Posts: 386
trilliwilli is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Lesu also makes 1/16 axles with locking differential. They are fysically smaller then the 1/14 scale Tamiya ones. In Europe they are sold under the Thicon brand: https://www.thicon-models.com/thicon...b-sperrbar-3_1

You may want to look for the original branded Lesu ones, but the sizes are mentioned on the Thicon site, so you can check if they are right for you.

The quality is good for the price, and the locking differential works really nice off road.
__________________
Greetings from Holland, William
Reply With Quote
  #3  
Old 04-01-2022, 01:39 PM
sparkycuda's Avatar
sparkycuda sparkycuda is offline
Journeyman
 
Join Date: Aug 2010
Location: English, IN
Posts: 697
sparkycuda is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Thanks! I will take a look at them.

Ken
__________________
Big iron is awesome!
Reply With Quote
  #4  
Old 04-01-2022, 01:42 PM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 1,991
frizzen is on a distinguished road
Default Re: 1/16 Axle with Differential needed

If price matters, check out Aluminum axle upgrades for JJRC 1/16 trucks.

They match the 1/16 WPL axle dimentions enough to be interchangable to the rest of those chassis. Have 5mm wheel hex. The pumpkin is bigger to fit the Geared open Diff instead of Spool.

What are ya building?
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #5  
Old 04-01-2022, 03:13 PM
jerry56 jerry56 is offline
Journeyman
 
Join Date: Apr 2019
Location: WV Panhandle
Posts: 740
jerry56 is on a distinguished road
Default Re: 1/16 Axle with Differential needed

I'll second Frizzen... JJRC even has a metal upgrade for the differential internals
Reply With Quote
  #6  
Old 04-03-2022, 02:46 AM
sparkycuda's Avatar
sparkycuda sparkycuda is offline
Journeyman
 
Join Date: Aug 2010
Location: English, IN
Posts: 697
sparkycuda is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Frizzen & jerry56: thanks for the info. I have looked at the JJRC Q61 truck and it shows the differential but I'm not clear which assembly I should get nor which aluminum housing I need - the Ebay descriptions don't have enough detail for me to be confident when ordering. Would appreciate your advice.
Thanks!
__________________
Big iron is awesome!
Reply With Quote
  #7  
Old 04-03-2022, 03:42 PM
jerry56 jerry56 is offline
Journeyman
 
Join Date: Apr 2019
Location: WV Panhandle
Posts: 740
jerry56 is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Here is a complete 4x4 set with Differentials... looking at them these fit the WPL housings not the JJRC so you could skip the JJRC entirely and go with these
https://www.aliexpress.com/item/4000...mend-recommend

Now if you already have a metal WPL axle set here is the rear differential to put in them

https://www.aliexpress.com/item/1005...mend-recommend
And this is the front
https://www.aliexpress.com/item/1005...rch-mainSearch
And all 3
https://www.aliexpress.com/item/1005...mend-recommend

Last edited by jerry56; 04-03-2022 at 03:51 PM.
Reply With Quote
  #8  
Old 04-03-2022, 05:42 PM
frizzen's Avatar
frizzen frizzen is offline
Big Dawg On The Bone
 
Join Date: Jan 2016
Location: indy, indiana
Posts: 1,991
frizzen is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Ok you said q61, so you want a 2 axle truck?

--The rtr trucks have plastic guts, plastic housings, with '2 screw' diff covers.

-- There's an upgrade with plastic housings with '4 screw' diff covers, this has metal gears with bearings
https://m.banggood.com/2PCS-Upgraded...lixnkid=776878

You can get plastic guts in plastic housings, metal guts in plastic, or metal guts in metal.

Good luck with translations, it gets pretty creative

Pretty similar 1/16 trucks with parts compatibility: WPL, JJRC, MN, Fayee

Jerry, cool find. I didn't know there were any WPL axle sized working Diffs
__________________
What do ya mean "Cars are neither Trucks or Construction"?
It's still scale, and i play fairly well with others, most of the time...
Reply With Quote
  #9  
Old 04-04-2022, 03:25 PM
jerry56 jerry56 is offline
Journeyman
 
Join Date: Apr 2019
Location: WV Panhandle
Posts: 740
jerry56 is on a distinguished road
Default Re: 1/16 Axle with Differential needed

It's odd but sometimes there are things on Aliexpress that aren't on Banggood....I used to use banggood all the time but I found Aliexpress cheaper...in some cases a lot cheaper.
Reply With Quote
  #10  
Old 04-08-2022, 12:04 AM
skeeter skeeter is offline
Big Dawg On The Bone
 
Join Date: Jul 2017
Location: Washington State
Posts: 1,732
skeeter is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Quote:
Originally Posted by jerry56 View Post
It's odd but sometimes there are things on Aliexpress that aren't on Banggood....I used to use banggood all the time but I found Aliexpress cheaper...in some cases a lot cheaper.
For some reason EVERY time I try to order on Bangood, my financial institution declines the charges to my card! For that reason I switched to AliExpress for most things that I don't urgently need. They seem to have some really SLOW boats these days!
Reply With Quote
  #11  
Old 04-08-2022, 11:17 AM
sparkycuda's Avatar
sparkycuda sparkycuda is offline
Journeyman
 
Join Date: Aug 2010
Location: English, IN
Posts: 697
sparkycuda is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Yes on the slow boats! My order estimated to arrive May 4.

Ken
__________________
Big iron is awesome!
Reply With Quote
  #12  
Old 04-07-2022, 03:32 PM
sparkycuda's Avatar
sparkycuda sparkycuda is offline
Journeyman
 
Join Date: Aug 2010
Location: English, IN
Posts: 697
sparkycuda is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Thanks for the assistance. Just ordered.

I'm converting a 1/16 diecast GMC flatbed straight truck.

Ken
__________________
Big iron is awesome!
Reply With Quote
  #13  
Old 08-11-2022, 01:30 PM
ddmckee54 ddmckee54 is offline
Green Horn
 
Join Date: Dec 2011
Posts: 227
ddmckee54 is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Ken:

Did you ever get your diff's, and if so how they working out?

Don
Reply With Quote
  #14  
Old 08-26-2022, 12:06 AM
sparkycuda's Avatar
sparkycuda sparkycuda is offline
Journeyman
 
Join Date: Aug 2010
Location: English, IN
Posts: 697
sparkycuda is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Yes. Recd & assembled. Look good, just have to get back on the project and decide what leaf springs I want to use.
__________________
Big iron is awesome!
Reply With Quote
  #15  
Old 03-02-2023, 01:16 PM
jerry56 jerry56 is offline
Journeyman
 
Join Date: Apr 2019
Location: WV Panhandle
Posts: 740
jerry56 is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Are you still working on this one...any updates...
Reply With Quote
  #16  
Old 07-26-2023, 03:41 PM
ddmckee54 ddmckee54 is offline
Green Horn
 
Join Date: Dec 2011
Posts: 227
ddmckee54 is on a distinguished road
Default Re: 1/16 Axle with Differential needed

Sparkycuda:

Any updates on your die-cast GMC straight truck conversion? Ever decide which springs to use?

Don
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:42 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.