|
Non Rc Model Trucks and Equipment This area is for the custom builders of the "MODEL" world to show there NON RC metal and plastic creations and builds. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Cat 966
Just got done with a 966 loader in 1/16 scale..It is made mostly out of wood..
Enjoy |
#2
|
||||
|
||||
Re: Cat 966
Another home run!
Cheers, Neil. |
#3
|
||||
|
||||
Re: Cat 966
Wow that's really nice. Great job! How did you do the pattern on the tires?
__________________
Brian Finster shavin' and smokin' a cigar?!?! |
#4
|
||||
|
||||
Re: Cat 966
nice work
|
#5
|
|||
|
|||
Re: Cat 966
Thanks for the kind words guys...
Finster, Here are a couple of photos that might help on the tire detail I make pattern out of poster board and divide it into the desired number of cuts to be made.. Mark the spacings on the tire.. Cut a 2X4 at 30 degrees and drill a 1/4 inch hole to take the bolt ( axel shaft) Note the red arrow..Each mark should allign on the arrow..Run the wheel throught the saw and advance to the next mark.. Set the table saw sled at 30 degrees and set the fence so that the wheel stops at a point where the center of the cut is at the center of the wheel..Always bump the wheel up to the fence on each pass to assure proper spacing.. Set the depth of the blade by making passes through scrap until the desired depth is attained.. I hope this helps.. |
#6
|
||||
|
||||
Re: Cat 966
Awsome Jerry ..Great to see you pumping out those beautiful models again ..nice work
Have you been tinkering with the Dozers as well...On of my foavorite builds by Far |
#7
|
|||
|
|||
Re: Cat 966
Hi Lou
Good to hear from you.. It has been pretty quiet lately in my shop...I retired from the commercial building and have been playing around with other things.. I have a Joal Cat 375 excavator and have kept in around for a pattern if the need ever comes to make a larger version of it..I did a little investigation into doing a 1/16 scale version, but a bit intimidated by the size...That thing would be huge, over 3 feet long..The real one weighs over 160,000 pounds.. |
#8
|
||||
|
||||
Re: Cat 966
Just think of all the extra room you would have to work with, LOL! I've found a furnace oil pump(hydraulic pump), that would be great in a large excavator. And they are cheap!
Cheer's, Neil. |
#9
|
|||
|
|||
Re: Cat 966
furnace oil pump..?? Sounds interesting...Where did you find it..
|
#10
|
||||
|
||||
Re: Cat 966
Quote:
Suntec A2VA7116, They are cheap on e bay. 2-3 gph at 150 psi. http://www.ebay.com/sch/i.html?_nkw=...mi=eBay+Motors The German pumps are 4.72 gph. Cheer's, Neil. |
#11
|
||||
|
||||
Re: Cat 966
Thanks for the explaining how you did the tire patterns, I appreciate it.
__________________
Brian Finster shavin' and smokin' a cigar?!?! |
#12
|
||||
|
||||
Re: Cat 966
Neil,
I'd liked to know more about those pumps too as I'm sure others would as well. Maybe you should start a thread about them, so we can discuss them in detail, I don't want to hijack this thread anymore.
__________________
Brian Finster shavin' and smokin' a cigar?!?! |
#13
|
||||
|
||||
Re: Cat 966
Quote:
Cheers, Neil. |
#14
|
|||
|
|||
Re: Cat 966
Neil
Are the pumps AC or DC...?? I am guessing DC |
#15
|
||||
|
||||
Re: Cat 966
Jerry, no motor included, a few details to be figured out!
Cheers, Neil. |
#16
|
|||
|
|||
Re: Cat 966
My bad Neil...I just assumed the motor was incorporated with the pump..
|
#17
|
||||
|
||||
Re: Cat 966
Quote:
I'm working on a new thread tonight. Cheer's, Neil. |
#18
|
||||
|
||||
Re: Cat 966
Great looking machine Jerry. What's next ?
Greg |
#19
|
|||
|
|||
Re: Cat 966
I'm working on a 966c (prototype) from cardboard. Dad won't let me weld.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|