RC Truck and Construction

RC Truck and Construction (https://www.rctruckandconstruction.com/index.php)
-   Electronics tech (https://www.rctruckandconstruction.com/forumdisplay.php?f=102)
-   -   All in one Lipo Charger (https://www.rctruckandconstruction.com/showthread.php?t=10424)

NORM 06-04-2015 06:48 PM

All in one Lipo Charger
 
im in the market for an All-in-One Lipo charger. looking for plug n play. hopefully no ext power supply. must be capable of charging a 6400 lipo pack. my current Triton2 only does 5000 max.

suggestions?

mavrick0 06-04-2015 07:14 PM

Re: All in one Lipo Charger
 
The capacity of the battery isn't an issue. If the charger is ending the cycle at 5000mah then just start it up again until it peaks. What you need to worry about is the wattage of the charger. To figure that out it's voltage x current. So in your situation to charger that battery at 1c it's 7.4 x 6.4 which equals 47 watts. So any charger with a wattage of 50 or higher will be good. Now this is assume you are using lipos. But if you want a good little charger with built in power supply look at the Hitec x1. If you want a charger that can do multiple batteries look at the Hitec x4 which is a AC/DC charger with 4 charging bays.

bigford 06-04-2015 08:31 PM

Re: All in one Lipo Charger
 
this I s the one I bought so far so good
Dynamite DYnC2020 Prophet Sport Duo / Dual AC Lipo / Nimh

NORM 06-07-2015 08:45 PM

Re: All in one Lipo Charger
 
Thank you


All times are GMT -4. The time now is 07:18 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.